W580i Unbelievable!!

[7volumes]

Hi all,

I Flashed my W580i to debrand with some SE-NSE users help a few days ago.

Going a little bit further i searched and asked for help from them on how to remove this phone's simlock and everything seemed to work fine ( SEtool Reflashing: Main, FS, Custpack, FAR and jdflasher followed all the steps )

The simlock persisted after the patching so after 2 days searching i used Ultimate Unlocker and did a permanent unlock to my phone ... Result : Amaizingly NOT WORKING !

Well , Logs explain it better than me so here it goes (actual phone status logs):

- SETool2LiteV1.11

Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit Index of ./ and buy FULL.

ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
Flash ID check:2019
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI:35651********* CERT:N/A
FLASH CID:52 COLOR:RED

Model:W580i
Brand:Sony Ericsson
MAPP CXC article: R8BE001 prgCXC1123362_GENERIC_LA
MAPP CXC version: R8BE001
Language Package:EUROPE_1
CDA article: CDA102568/10
CDA version: R8A
Default article: cxc1123364
Default version: R8BE001

Operator: 000-00
Elapsed:5 secs.

- XS++ Log :

09:50:21| Hold 'C' button on phone and connect phone NOW.
09:50:21| You have 30 seconds...
09:50:21|
09:50:25| Baseband ID: 9900
09:50:25| Protocol Version: 3.1
09:50:25| Warning: IMEI name does not match GDFS name (IMEI:NULL GDFS:W580)
09:50:25| ...using GDFS name
09:50:25|
09:50:25| Profiling SEMC phone...
09:50:25| Platform: DB2020
09:50:25| OTP CID: 51
09:50:25| EROM CID: 52
09:50:25| EROM Color: Red
09:50:25| IMEI: 35651402xxxxxx
09:50:25| Phone ID: W580
09:50:25| Region: EUROPE_1
09:50:25| CDA: CDA102568/10 R8A
09:50:25| Firmware Version: R8BE001
09:50:25| EROM: R3A022
09:50:25| Ready for operation!


So , resuming the situation about the phone :

- Inserting <**< i get Network = Unlocked , Subnetwork = Unlocked !

- When i remove my original SIM card in order to put a Vodafone card i get "Insert SIM card or view the phone demo" dialogue.

If i go to the secret menu -> * <- <- * <- * ->, Service Info, SIM Lock i get :
- Network (unlocked symbol) 3
-Subnetwork (unlocked symbol) 5
-Service Provider (unlocked symbol) 5
-Group (unlocked symbol) 5
-"Enlarged"?? (unlocked symbol) 5


I'm lost... Seems that the phone really is unlocked but no way i can make another sim to work on it....
Any Suggestions?


Regards,

[riders4sia]

may be your phone doesn't support the type of your sim. i had a problem too that inserting my airtel 128k, phone says insert sim card. i think you had the same problem, please verify that your sim is compatible with another w580

[7volumes]

Hi ty for your reply riders4sia,

I've tried with different SIM's and the result is the same. I tried also reflashing it after using Ultimate Unlocker with Main+FS+Custpack and made the quick access patch and the vkp remove SIM Lock but still aint working !! Dont know what else to do... Unlockable phone ?

[SeaMonkey]

Just reflash your phone with MAIN,FS and CUSTPACK (don't apply QA patch or remove SIMLOCK ) and turn on phone and when you ask for SIM - first put original SIM and wait to download settings and then change SIM

[harlysorto]

Just reflash your phone with MAIN,FS and CUSTPACK (don't apply QA patch or remove SIMLOCK ) and turn on phone and when you ask for SIM - first put original SIM and wait to download settings and then change SIM

or dont get all complicated and use the IMEI unlock code you can get from your service provider for free just tell them its cause you may go out of the country (roaming charges) if you alreay had unlocked your phone as u said RE-lock it and then use the unlock code.

<<* and make sure its the SUBSIDY code not the PUK

[tonywong41]

flash ur fone again with the original firmware, and c what happens

[riders4sia]

try what seamonkey said, if it didn't help, reflash your phone using setool1.11 and apply simlock patch and see if it work. have a nice day

[alexsf15]

try flashing it again with setool and check the bypass db2020 box and quick acsess box.see wut happens