Unlocking regarding W580

[yayo830]

O well, since This is after the "remove Sim lock" tutorial procedure, I don't know what system do i use to flash the Main. Do i use Setool2? or XS++? Could you please, i would very much appreciate that if you can guide me through a detail solution on what i should click, tick and so on...

Also just wondering, is my phone bricked at this moment? cause even when i tried to turn it on, it just vibrate once then the screen won't turn on... T_T

PS: I also found out that there are no tutorial for unbricking the phones T_T.

PSS: Ok, as it turns out, I don't think the phone is bricked, luckily...Here is what it all happened....

I began follow the "remove Sim Lock" tutorial, unlocked the phone with that superb guide *thanks to the author* then I use XS++ to flash the Main, FS and custom files. I got myself a phone with network 10 but every other things 5 =(. Later I was told that I should Flash my phone first (flash with Setool2 or XS++?) then unlock it. So being one smartass, I thought since I flashed the phone with XS++, that means the phone now should be done with the Flashing Procedure. Then I proceed on reunlocking the phone again, which follow the tutorial for DC2020 CID 52 procedure. That is when I encountered a "brick-like" situation... =( Luckily now I went back to XS++ and reflash the phone with Main, FS and custom files, the phone back on the network 10, others 5 status... My question now is that: What should I do now to be able to have the network 10 unlocked to 5? Do i try and unlock the phone again with the DC2020 CID 52 procedure? or I actually can short-cut some procedure since I alrdy Unlock the phone before + i have alrdy done flashing main firmware....

I would super appreciated on the help...

thanks guys