XS++ stalled at this point for 15 mins

[Hicky]

Well, I have made some progress...Phone finally detected by 8.4 and XS++...Next problem...I have upgraded to latest trough SEUS, wanted to downgrade again to w810_R4CE012_MAIN_GENERIC_HN.bin with XS2++...Now it has stalled at this point for 15mins:
21:38:08| PORT STATUS: ACTIVE
21:38:48| Baseband ID: 8040
21:38:48| Hardware Platform: db2010 Marita compact
21:38:48| Protocol Version: 3.1
21:38:49| +++ Speed set to 921600
21:38:49| Sending loaders\db2010_cid00_prodid_p3k.bin...
21:38:49| This is a PRODUCTION_ID loader
21:38:50| Activating GDFS...
21:38:50| phone name detected
21:38:50| +++ Restarting phone - please wait...
21:38:55| Baseband ID: 8040
21:38:55| Hardware Platform: db2010 Marita compact
21:38:55| Protocol Version: 3.1
21:38:56| +++ Speed set to 921600
21:38:56| +++ Phone has restarted successfully...
21:38:56| ++++++++++++++++++++++++++++++++++
21:38:56| PHONE INFO
21:38:56| ++++++++++++++++++++++++++++++++++
21:38:56| DBID: db2010
21:38:56| OTP CID: 49
21:38:56| EROM CID: 49
21:38:56| EROM color: Red
21:38:56| IMEI: xxxxxxxxxxxxxx
21:38:56| Phone: W810
21:38:56| Operator: EUROPE_4
21:38:56| CDA: CDA102494/87 R3A
21:38:56| Firmware: R4ED001
21:38:56| EROM: n/a
21:38:56| ++++++++++++++++++++++++++++++++++
21:38:56| Ready for operation!
21:39:04| Sending loaders\db2010_cid49red_flash_r2a003.bin...

Ouch...I should have asked in XS++ subforum...Can mod please move it..?

[luzer]

Does it happends with both cables, service and DCU-60?

[p2pfiles]

well the problem seems with ur file.... wich file are you using to flash this happens when the flash file you are trying to flash is not supported with ur orignal firmware ... try to find a correct file that siuts ur phone

[Khaba]

are you brute forcing the phone? Do you know you can flash the phone without brute forceing it?

[gbgh]

I heard that fist time.What a pitty

[Hicky]

Does it happends with both cables, service and DCU-60?

No, only with TMS cable...With DCU flash starts right away..

But, I went back to 8.4 and flashed it, this went very well, and I did a direct unlock afterwards...

For fun I first tried to read all codes, 8.4 read all codes, no problem, but as I wrote, I used Clear SP locks option instead..

So, my W810 is now unlocked...:D

[alphatag]

are you brute forcing the phone? Do you know you can flash the phone without brute forceing it?

from the log here, it hasn't started to bruteforce yet. bruteforcing will occur after the flashing of the main and fs, which is called the customization step.. they're stuck at the flashing part...

i agree that K750/W800 with CID49 can be finalized much faster with FAR + SEFP mod