Problems unlocking W580i

[Borilla]

Hi,

I recently bought a Sony Ericsson w580i, locked to Orange (France), and I'm trying to unlock it but it doesn't want to.
I used as MAIN firmware: W580_R8BE001_MAIN_GENERIC_LA_RED52.mbn
It did everything as explained in the unlock tutorial.
When the process is finished and I want to put another SIM in my cellphone it says 'Insert SIM' but when I press >*<<*<* all the 5 locks are open.
Does someone knows what I am doing wrong?

Here's the output from SEtool:

Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit Index of ./ and buy FULL.

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:355989xxxxxxxx CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok

CID52 BYPASS PROCEDURE STARTED
Processing part1...
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
Processing part2...
Processing part3....
OTP LOCKED:1 CID:51 PAF:1 IMEI:355989xxxxxxxx CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok

REMOVE CABLE FROM PHONE
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

HOLD "C" BUTTON AND ATTACH PHONE

CID52 BYPASS PROCEDURE FINISHED

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDR:DB2020_PRELOADER_FOR_SETOOL2
LDR:DB2020 LOADER FOR SETOOL2
Flash ID check:897E
Flash props sent ok
writing I:\Unlock\Setool2lite V1.11\qamaker\W580_R8BE001_MAIN_GENERIC_LA_RED52.m bn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:9200
Will flash 460 blocks...
SSW loading returns:0
Going to execute VKP script....
Starting to process VKP patch script: I:\Unlock\Setool2lite V1.11\qamaker\quick_access_W580_R8BE001.vkp
VKP script loaded OK. Lines: 1637
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44140000
New block #0001 added: $45BC0000
Blocks selected OK. Reading blocks: 2
Blocks readed to memory OK. Checking contents...
Blocks patched OK. Start writing...
Block 0 written
Block 1 written
VKP script executed OK
Elapsed:835 secs.

Going to execute VKP script....
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDR:quick access patch by den_po
FLASH CID:52 COLOR:RED
OTP LOCKED:1 CID:51 PAF:1 IMEI:355989xxxxxxxx CERT:RED
LDR:DB2020 LOADER FOR SETOOL2
Starting to process VKP patch script: I:\Unlock\SIMLockPatchGen\vkp\Remove_SIM_lock_W580 _R8BE001.vkp
VKP script loaded OK. Lines: 6
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44600000
Blocks selected OK. Reading blocks: 1
Blocks readed to memory OK. Checking contents...
Blocks patched OK. Start writing...
Block 0 written
VKP script executed OK
Elapsed:37 secs.

[MW.KH]

because u flashed it with the sim-unlock patch
instead u use SETool Lite v1.11 and u write the patch onto the phone as a script
hope that helps

[yayo830]

because u flashed it with the sim-unlock patch
instead u use SETool Lite v1.11 and u write the patch onto the phone as a script
hope that helps

From his log, he did everything correctly from that "remove_sim_lock" tutorial. He did say that in the end he has all lock unlocked.

[yayo830]

Hi,

I recently bought a Sony Ericsson w580i, locked to Orange (France), and I'm trying to unlock it but it doesn't want to.
I used as MAIN firmware: W580_R8BE001_MAIN_GENERIC_LA_RED52.mbn
It did everything as explained in the unlock tutorial.
When the process is finished and I want to put another SIM in my cellphone it says 'Insert SIM' but when I press >*<<*<* all the 5 locks are open.
Does someone knows what I am doing wrong?

Here's the output from SEtool:

Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit Index of ./ and buy FULL.

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:355989xxxxxxxx CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok

CID52 BYPASS PROCEDURE STARTED
Processing part1...
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
Processing part2...
Processing part3....
OTP LOCKED:1 CID:51 PAF:1 IMEI:355989xxxxxxxx CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok

REMOVE CABLE FROM PHONE
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

HOLD "C" BUTTON AND ATTACH PHONE

CID52 BYPASS PROCEDURE FINISHED

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDR:DB2020_PRELOADER_FOR_SETOOL2
LDR:DB2020 LOADER FOR SETOOL2
Flash ID check:897E
Flash props sent ok
writing I:\Unlock\Setool2lite V1.11\qamaker\W580_R8BE001_MAIN_GENERIC_LA_RED52.m bn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:9200
Will flash 460 blocks...
SSW loading returns:0
Going to execute VKP script....
Starting to process VKP patch script: I:\Unlock\Setool2lite V1.11\qamaker\quick_access_W580_R8BE001.vkp
VKP script loaded OK. Lines: 1637
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44140000
New block #0001 added: $45BC0000
Blocks selected OK. Reading blocks: 2
Blocks readed to memory OK. Checking contents...
Blocks patched OK. Start writing...
Block 0 written
Block 1 written
VKP script executed OK
Elapsed:835 secs.

Going to execute VKP script....
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDR:quick access patch by den_po
FLASH CID:52 COLOR:RED
OTP LOCKED:1 CID:51 PAF:1 IMEI:355989xxxxxxxx CERT:RED
LDR:DB2020 LOADER FOR SETOOL2
Starting to process VKP patch script: I:\Unlock\SIMLockPatchGen\vkp\Remove_SIM_lock_W580 _R8BE001.vkp
VKP script loaded OK. Lines: 6
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44600000
Blocks selected OK. Reading blocks: 1
Blocks readed to memory OK. Checking contents...
Blocks patched OK. Start writing...
Block 0 written
VKP script executed OK
Elapsed:37 secs.

Did u try with a Sim card or no? cause you said "you want to" and you also said you had them all unlocked... Kinda confusing here...You are either saying "I tried with a Sim card but it says "Insert the correct Sim card" while my phone is fully unlocked or I don't know...

If you had them all unlocked (even network), then you shouldnt have any problem using the phone with all different types of sim card...From your log, I don't really see any errors either, you did follow the steps