Bricked w600i

[squall_l]

im guys, looks like i bricked the phone 4 sure...

welcome to setool2 lite edition v 1.08
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
FILE RECOGNIZED AS CUSTOMIZATION PACKAGE.

CDA:CDA102453-6_091505
MODEL:W600i
VARIANT:AMERICA_2
LANGUAGE: EN
LANGUAGE: PB
LANGUAGE: XL

Will backup GDFS now.
Abort all operations.
phone pre-boot failed,possible RECOVERY needed.
Elapsed:72 secs.
ChipID:8040,EMP protocol:0301
OLD EROM, OVERRIDING COLOR
OLD EROM, OVERRIDING CID
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35744500585123 CERT:RED
LDR:051207 0928 NPACXC1250165_1_SEMC_COMPACTFLASHLOADER R2B
Flash ID check:890D
Flash props sent ok
ldr blk write fail. fatal
ldr blk write fail. fatal
ldr blk write fail. fatal
ldr blk write fail. fatal
ldr blk write fail. fatal
ldr blk write fail. fatal
ldr blk write fail. fatal
ldr blk write fail. fatal
ldr blk write fail. fatal
ldr blk write fail. fatal
ldr blk write fail. fatal
ldr blk write fail. fatal
ldr blk write fail. fatal
ldr blk write fail. fatal
ldr blk write fail. fatal
ldr blk write fail. fatal
ldr blk write fail. fatal
ldr blk write fail. fatal
ldr blk write fail. fatal
ldr blk write fail. fatal
Can't get packet properties.
...superblock not accepted
prepare failed,that is FATAL
Elapsed:344 secs.


what next?? tha phone aint starting up now!!!!

[rapidfan91]

Try a full flash (Main + FS + Customfiles)

[djrulaz]

Use setool2lite1.11

[squall_l]

setools 1.11?? how can i flash if the phone cant even go into flash mode?? i cant even charge the damn phone!!!! ahhhhhhhhhhHHHHHH!!!!!!!!

help me plz!!!

[djrulaz]

But you using 1.07, the new version may be shows you real problem!!!

And you can use another batery, or, with lucky, do a fast Identify!!!

[URBANO]

It has the battery with low load, you must load it in another phone as hers in that state does not charge or borrow another.

And then try to vuelba.

greetings.