Hi, I have been trying to fix my girls CID49 RED w810i using XS++ & setool2lite after a WSOD.

I did seem to be getting somewhere using various guides as the SE logo would come on when the charger was plugged in, but after flashing it again with the customize FS box checked it will not start at all and setool2lite will not even recognise the fone but XS++ will.

I backed up the GDFS before I did anything.
The files i used are
W810_R4EA031_MAIN_GENERIC_HN_RED49
W810_R4EA031_FS_EUROPE_2_RED49

Log from XS++


11:17:54| Attempting to open the interface...

11:17:54|

11:17:54| TURN OFF PHONE!

11:17:54| Hold 'C' button on phone and connect phone NOW.

11:17:54| You have 30 seconds...

11:17:54|

11:18:00| Baseband ID: 8040

11:18:00| Protocol Version: 3.1

11:18:00|

11:18:00| Sending db2010_cid00_prodid_p3l.bin...

11:18:01| Applet ID: 061113 1250 ALUCXC125872_COMPACTPRODUCTION_ID_LOADER P3L

11:18:01| This is a PRODUCTION_ID loader

11:18:01| Activating GDFS...

11:18:01| Cannot open GDFS

11:18:01| Activating GDFS...

11:18:01| Cannot open GDFS

11:18:01| Activating GDFS...

11:18:01| Cannot open GDFS

11:18:01| Activating GDFS...

11:18:01| Cannot open GDFS

11:18:01| Activating GDFS...

11:18:01| Cannot open GDFS

11:18:01| Warning: IMEI name does not match GDFS name (IMEI:W810 GDFS:n/a)

11:18:01| ...using IMEI name

11:18:01|

11:18:01| Profiling SEMC phone...

11:18:01| Platform: DB2010

11:18:01| OTP CID: 49

11:18:01| EROM CID: 52

11:18:01| EROM Color: Red

11:18:01| IMEI: 35233601xxxxxx

11:18:01| Phone ID: W810

11:18:01| Region: n/a

11:18:01| CDA: n/a n/a

11:18:01| Firmware Version: n/a

11:18:01| EROM: n/a

11:18:01| Ready for operation!

11:20:20| ~~~~~~~~~~ Custpack information ~~~~~~~~~~

11:20:20| Custpack: EUROPE_1 (CDA102494/108) (W810)

11:20:20| Generic(non-branded) custpack: Yes

11:20:20| Allowed languages: en, pt, es, fr,

11:20:20| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

11:20:23| ~~~~~~~~~~ Custpack information ~~~~~~~~~~

11:20:23| Custpack: EUROPE_2 (CDA102494/4) (W810)

11:20:23| Generic(non-branded) custpack: Yes

11:20:23| Allowed languages: en, fr, de, tr, st, zu,

11:20:23| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

11:20:32|

11:20:32| Sending db2010_db2012_cid52red_flash_r2b012.bin...

11:20:32| Header: Error 0x10

11:20:32| Error: Cannot send flash loader

11:20:32| Error: Flashing failed

11:20:34| Disconnected... Unplug the phone

11:20:45| Shutting down...

SETool2lite log

ChipID:8040,EMP protocol:0301
erom_readvar: error reading unit 0/6
error while reading security units
SECURITY UNITS CAN'T BE READ !
DAMAGED FIRMWARE/GDFS OR EMPTY PHONE
phone pre-boot failed,possible RECOVERY needed.
Elapsed:4 secs.

Cany anyone shed any light on this??? :confused: