[SOLVED] Yup, another w810i debranding question

[bestcell]

No need to reply, problem solved w/Setool2Lite !!!!


After spending several DAYS doing research on debranding, I've hit the next barrier: Error codes on XS++ (Same codes for MAIN of FS)!

When going into the "Service Menu" on the phone (w810i) it shows:
CID50
MAIN: R4EA031 1250316_GENERIC_HN
FS : R4ED001 ROGERS , CDA102494/128 R6A

And XS++ confirms the above, so I chose the following for my updates/debranding:
w810_r4ea031_main_generic_hn_red50.mbn
w810_r4ed001_fs_america_2_red50.fbn
(Custom Pack) W810_CDA102555_107_R2A_Generic_AMERICA_2

But as you can see below, it doesn't matter if I'm doing a MAIN only or FS only I get the same errors:
"Binary acknowledge failed with: 15
Command: Error 0x15
Failed sending flashblock 1. Returnvalue 0xFFFF250B"



22:16:02| Baseband ID: 8040
22:16:02| Protocol Version: 3.1
22:16:02| NEW SECURITY PHONE DETECTED! SWITCHING...
22:16:03| Phone name detected!
22:16:03|
22:16:03| Profiling SEMC phone...
22:16:03| Platform: DB2010
22:16:03| OTP CID: 50
22:16:03| EROM CID: 50
22:16:03| EROM Color: Red
22:16:03| IMEI: 356xxxxxxxxxxxx
22:16:03| Phone ID: W810
22:16:03| Region: ROGERS
22:16:03| CDA: CDA102494/128 R6A
22:16:03| Firmware Version: R4ED001
22:16:03| EROM: n/a
22:16:03| Ready for operation!
------------------------------------------------------------------------
22:17:36| Sending db2010_db2012_cid50red_flash_r1a002.bin...
22:17:37| Applet ID: 060712 1520 HAN_DB2012_FLASHLOADER_R1A002_CXC1250695
22:17:37| This is a FLASH loader
22:17:37| Now flashing firmware main...
22:17:37| Flashing e:\unzipped\cell\firmware\w810_r4ea031_main_generi c_hn_red50.mbn
22:17:37| Header type: BABE
22:17:37| 344 flashblocks
22:17:37| Binary acknowledge failed with: 15
22:17:37| Command: Error 0x15
22:17:37| Failed sending flashblock 1. Returnvalue 0xFFFF250B
22:17:37| Finishing flash
22:18:27| Error: Flashing failed
22:18:27| Disconnected... Unplug the phone
-----------------------------------------------------------------------
23:19:00| Sending db2010_db2012_cid50red_flash_r1a002.bin...
23:19:01| Applet ID: 060712 1520 HAN_DB2012_FLASHLOADER_R1A002_CXC1250695
23:19:01| This is a FLASH loader
23:19:01| Now flashing filesystem...
23:19:01| Flashing e:\unzipped\cell\firmware\w810_r4ed001_fs_america_ 2_red50.fbn
23:19:01| Header type: BABE
23:19:01| 157 flashblocks
23:19:03| Binary acknowledge failed with: 15
23:19:03| Command: Error 0x15
23:19:03| Failed sending flashblock 1. Returnvalue 0xFFFF250B
23:19:03| Finishing flash
23:19:10| Error: Flashing failed
23:19:10| Disconnected... Unplug the phone

I hear that there may be a "bug" w/CID50 and XS++ and to try SeTools, but everytime I try a different source for d/l SeTools it turns out to have a virus in it!
I also seem to recall something about unlocking first before debranding but yet CID50 cannot be unlocked w/the DCU-60 cable and .vkp patches (only CID 49).

The only things that seem to work so far however, is that i DID make a GDFS backup and added/deleted some "test" files with "FSX"


Any Ideas?[/CODE]


No need to reply, problem solved w/Setool2Lite !!!!