Results 1 to 3 of 3
  1. #1
    Recently Initiate
    Join Date
    Oct 2008
    Device
    -
    Posts
    5
    Thanks
    0
    Thanked 0 Times in 0 Posts

    w300i 'gone far but not near enough'

    I have an unlocked w300i, which I have been attempting to get back up for about five days! I can flash the main firmware and file system but not the custpack. It always hangs on 'Activating file system'. I am obviously doing something wrong... Help please. I wonder how long I should leave it. My battery was full (I have a charger + and spare).

    This is a typical (and my current one) log:

    11:16:08|
    11:16:14| Baseband ID: 8040
    11:16:14| Protocol Version: 3.1
    11:16:14|
    11:16:14| Sending db2010_cid00_prodid_p3l.bin...
    11:16:14| Applet ID: 061113 1250 ALUCXC125872_COMPACTPRODUCTION_ID_LOADER P3L
    11:16:14| This is a PRODUCTION_ID loader
    11:16:14| Activating GDFS...
    11:16:15| Phone name detected!
    11:16:15|
    11:16:15| Profiling SEMC phone...
    11:16:15| Platform: DB2010
    11:16:15| OTP CID: 49
    11:16:15| EROM CID: 49
    11:16:15| EROM Color: Red
    11:16:15| IMEI: 35998800xxxxxx
    11:16:15| Phone ID: W300
    11:16:15| Region: T_MOB_INT_A
    11:16:15| CDA: CDA102499/7 R16A
    11:16:15| Firmware Version: R9A031
    11:16:15| EROM: n/a
    11:16:15| Ready for operation!
    11:16:25|
    11:16:25| Sending db2010_cid49red_flash_r2a003.bin...
    11:16:26| Applet ID: 060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
    11:16:26| This is a FLASH loader
    11:16:26| Now flashing firmware main...
    11:16:26| Flashing e:\se\xs++ v3.1(darwin)\files_to_upload\w300_r9a031_main_gene ric_je_red49.mbn
    11:16:26| Header type: BABE
    11:16:26| 336 flashblocks
    11:19:04| Finishing flash
    11:19:05| Done flashing
    11:19:05| Flashing was successful
    11:19:07| Disconnected... Unplug the phone
    11:19:41|
    11:19:41| Attempting to open the interface...
    11:19:41|
    11:19:41| TURN OFF PHONE!
    11:19:41| Hold 'C' button on phone and connect phone NOW.
    11:19:41| You have 30 seconds...
    11:19:41|
    11:19:46| Baseband ID: 8040
    11:19:46| Protocol Version: 3.1
    11:19:46|
    11:19:46| Sending db2010_cid00_prodid_p3l.bin...
    11:19:46| Applet ID: 061113 1250 ALUCXC125872_COMPACTPRODUCTION_ID_LOADER P3L
    11:19:46| This is a PRODUCTION_ID loader
    11:19:46| Activating GDFS...
    11:19:47| Phone name detected!
    11:19:47|
    11:19:47| Profiling SEMC phone...
    11:19:47| Platform: DB2010
    11:19:47| OTP CID: 49
    11:19:47| EROM CID: 1885341769
    11:19:47| EROM Color: Unknown
    11:19:47| IMEI: 35998800xxxxxx
    11:19:47| Phone ID: W300
    11:19:47| Region: T_MOB_INT_A
    11:19:47| CDA: CDA102499/7 R16A
    11:19:47| Firmware Version: R9A031
    11:19:47| EROM: n/a
    11:19:47| Ready for operation!
    11:19:58| Sorry, your phone is NOT SUPPORTED
    11:19:58| Error: Cannot send flash loader
    11:19:58| Error: Flashing failed
    11:20:00| Disconnected... Unplug the phone
    11:21:43|
    11:21:52| Baseband ID: 8040
    11:21:52| Protocol Version: 3.1
    11:21:52|
    11:21:52| Sending db2010_cid00_prodid_p3l.bin...
    11:21:52| Applet ID: 061113 1250 ALUCXC125872_COMPACTPRODUCTION_ID_LOADER P3L
    11:21:52| This is a PRODUCTION_ID loader
    11:21:52| Activating GDFS...
    11:21:53| Phone name detected!
    11:21:53|
    11:21:53| Profiling SEMC phone...
    11:21:53| Platform: DB2010
    11:21:53| OTP CID: 49
    11:21:53| EROM CID: 49
    11:21:53| EROM Color: Unknown
    11:21:53| IMEI: 35998800xxxxxx
    11:21:53| Phone ID: W300
    11:21:53| Region: T_MOB_INT_A
    11:21:53| CDA: CDA102499/7 R16A
    11:21:53| Firmware Version: R9A031
    11:21:53| EROM: n/a
    11:21:53| Ready for operation!
    11:21:59| Sorry, your phone is NOT SUPPORTED
    11:21:59| Error: Cannot send flash loader
    11:21:59| Error: Flashing failed
    11:22:01| Disconnected... Unplug the phone
    11:31:52|
    11:31:52| Attempting to open the interface...
    11:31:52|
    11:31:52| TURN OFF PHONE!
    11:31:52| Hold 'C' button on phone and connect phone NOW.
    11:31:52| You have 30 seconds...
    11:31:52|
    11:32:01| Baseband ID: 8040
    11:32:01| Protocol Version: 3.1
    11:32:01|
    11:32:01| Sending db2010_cid00_prodid_p3l.bin...
    11:32:01| Applet ID: 061113 1250 ALUCXC125872_COMPACTPRODUCTION_ID_LOADER P3L
    11:32:01| This is a PRODUCTION_ID loader
    11:32:01| Activating GDFS...
    11:32:02| Phone name detected!
    11:32:02|
    11:32:02| Profiling SEMC phone...
    11:32:02| Platform: DB2010
    11:32:02| OTP CID: 49
    11:32:02| EROM CID: 49
    11:32:02| EROM Color: Red
    11:32:02| IMEI: 35998800xxxxxx
    11:32:02| Phone ID: W300
    11:32:02| Region: T_MOB_INT_A
    11:32:02| CDA: CDA102499/7 R16A
    11:32:02| Firmware Version: R9A031
    11:32:02| EROM: n/a
    11:32:02| Ready for operation!
    11:32:15|
    11:32:15| Sending db2010_cid49red_flash_r2a003.bin...
    11:32:15| Applet ID: 060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
    11:32:15| This is a FLASH loader
    11:32:15| Now flashing filesystem...
    11:32:15| Flashing e:\se\xs++ v3.1(darwin)\files_to_upload\w300_r9a031_fs_europe _2_red49.fbn
    11:32:15| Header type: BABE
    11:32:15| 161 flashblocks
    11:33:31| Finishing flash
    11:33:32| Done flashing
    11:33:32| Flashing was successful
    11:33:34| Disconnected... Unplug the phone
    11:50:56|
    11:50:56| Attempting to open the interface...
    11:50:56|
    11:50:56| TURN OFF PHONE!
    11:50:56| Hold 'C' button on phone and connect phone NOW.
    11:50:56| You have 30 seconds...
    11:50:56|
    11:51:02| Baseband ID: 8040
    11:51:02| Protocol Version: 3.1
    11:51:02|
    11:51:02| Sending db2010_cid00_prodid_p3l.bin...
    11:51:02| Applet ID: 061113 1250 ALUCXC125872_COMPACTPRODUCTION_ID_LOADER P3L
    11:51:02| This is a PRODUCTION_ID loader
    11:51:02| Activating GDFS...
    11:51:03| Phone name detected!
    11:51:03|
    11:51:03| Profiling SEMC phone...
    11:51:03| Platform: DB2010
    11:51:03| OTP CID: 49
    11:51:03| EROM CID: 49
    11:51:03| EROM Color: Red
    11:51:03| IMEI: 35998800xxxxxx
    11:51:03| Phone ID: W300
    11:51:03| Region: T_MOB_INT_A
    11:51:03| CDA: CDA102499/7 R16A
    11:51:03| Firmware Version: R9A031
    11:51:03| EROM: n/a
    11:51:03| Ready for operation!

    11:55:10|
    11:55:18| Baseband ID: 8040
    11:55:18| Protocol Version: 3.1
    11:55:18|
    11:55:18| Sending db2010_cid00_prodid_p3l.bin...
    11:55:18| Failed
    11:55:18| Sending PRODUCTION_ID LOADER
    11:55:18|
    11:55:18| Sending db2010_cid00_prodid_p3l.bin...
    11:55:18| Prologue: Failed
    11:55:18| Activating GDFS...
    11:55:26| Disconnected... Unplug the phone
    11:55:35|
    11:55:35| Attempting to open the interface...
    11:55:35|
    11:55:35| TURN OFF PHONE!
    11:55:35| Hold 'C' button on phone and connect phone NOW.
    11:55:35| You have 30 seconds...
    11:55:35|
    11:55:45| Baseband ID: 8040
    11:55:45| Protocol Version: 3.1
    11:55:45|
    11:55:45| Sending db2010_cid00_prodid_p3l.bin...
    11:56:02| Disconnected... Unplug the phone
    11:56:26|
    11:56:26| Attempting to open the interface...
    11:56:26|
    11:56:26| TURN OFF PHONE!
    11:56:26| Hold 'C' button on phone and connect phone NOW.
    11:56:26| You have 30 seconds...
    11:56:26|
    11:56:33| Baseband ID: 8040
    11:56:33| Protocol Version: 3.1
    11:56:33|
    11:56:33| Sending db2010_cid00_prodid_p3l.bin...
    11:56:33| Applet ID: 061113 1250 ALUCXC125872_COMPACTPRODUCTION_ID_LOADER P3L
    11:56:33| This is a PRODUCTION_ID loader
    11:56:33| Activating GDFS...
    11:56:34| Phone name detected!
    11:56:34|
    11:56:34| Profiling SEMC phone...
    11:56:34| Platform: DB2010
    11:56:34| OTP CID: 49
    11:56:34| EROM CID: 49
    11:56:34| EROM Color: Red
    11:56:34| IMEI: 35998800xxxxxx
    11:56:34| Phone ID: W300
    11:56:34| Region: T_MOB_INT_A
    11:56:34| CDA: CDA102499/7 R16A
    11:56:34| Firmware Version: R9A031
    11:56:34| EROM: n/a
    11:56:34| Ready for operation!
    11:56:38| ~~~~~~~~~~ Custpack information ~~~~~~~~~~
    11:56:38| Custpack: AMERICA_2 (CDA102499/112) (W300)
    11:56:38| Generic(non-branded) custpack: No
    11:56:38| Allowed languages: en, pb, xl,
    11:56:38| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    11:57:25| ~~~~~~~~~~ Custpack information ~~~~~~~~~~
    11:57:25| Custpack: EUROPE_2 (CDA102499/13) (W300)
    11:57:25| Generic(non-branded) custpack: No
    11:57:25| Allowed languages: en, fr, de, tr, st, zu,
    11:57:25| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    11:57:42| ~~~~~~~~~~ Custpack information ~~~~~~~~~~
    11:57:42| Custpack: AMERICA_2 (CDA102499/112) (W300)
    11:57:42| Generic(non-branded) custpack: No
    11:57:42| Allowed languages: en, pb, xl,
    11:57:42| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    11:58:12| ~~~~~~~~~~ Custpack information ~~~~~~~~~~
    11:58:12| Custpack: EUROPE_2 (CDA102499/13) (W300)
    11:58:12| Generic(non-branded) custpack: No
    11:58:12| Allowed languages: en, fr, de, tr, st, zu,
    11:58:12| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    11:58:16|
    11:58:16| Sending db2010_cid49red_cs_r3a010.bin...
    11:58:18| Applet ID: 070524 1030 AN2CXC1327364_COMPACT_SEMC_CS_LOADER__R3A010
    11:58:18| This is a CHIPSELECT loader
    11:58:18| Activating loader...
    11:58:18| Activating GDFS...
    12:00:02| This loader is UNLOCKED
    12:00:02| Success! CS-loader has been unlocked!
    12:00:02| Uploading customization files to phone...
    12:00:02| Uploading /tpa/preset/custom/CONTENT_DOWNLOAD_HOOK.itm...
    12:00:02| Activating filesystem

  2. #2
    Recently Initiate
    Join Date
    Sep 2008
    Device
    -S500<W580
    Posts
    5
    Thanks
    0
    Thanked 1 Time in 1 Post

    Re: w300i 'gone far but not near enough'

    Hi. if you using setool the cust file must be a .rar. i got no problem flashing Z530 cid 49. try again

  3. #3
    Recently Initiate
    Join Date
    Oct 2008
    Device
    -
    Posts
    5
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Re: w300i 'gone far but not near enough'

    Look I know you are trying to be helpful but if you knew how to read the log you would know I am currently using XS++.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •