Results 1 to 2 of 2
  1. #1
    Recently Initiate
    Join Date
    Feb 2007
    Device
    -
    Posts
    3
    Thanks
    1
    Thanked 0 Times in 0 Posts

    Exclamation Can't debrand w910i blue52

    Hi all
    I've used ultimate unlocker 1.03 to debrad my phone (w910 red52 vodafone branded), it was unlocked succesfully but it was turned to blue52. Now i want to debrand it but i can't because i get this errors. First i've tryied by holding 2&5 : This is the log
    D-Client v1.61 (0021):(
    Turn off the phone.
    Hold its C-button and connect it to the cable within 30 seconds.

    EPI opened & EPI thread started.
    ASIC: db3150
    Boot mode: ROM

    Phone model: W910i
    Phone CID:
    Phone version: Choose from list
    Phone language:
    CDA:
    Customize: Yes
    Customize: Yes
    Unlock: No
    Flash file: W910i_1200-5451_CentAsia_R1FA035_Red52.a2fs
    Flash file: W910i_12009123_Generic_R1FA035_Red52.a2sw
    Sending CS loader...
    Please wait...
    Phone is off.
    Error occured...
    EPIUSB connection closed
    (55FDA7A8)
    (2D6FED2C)
    Error occured during sending loader. (9C498AA1)
    Program finished with error. Disconnect cable and remove battery from the phone.

    Then i've tryied by holding C ; here is the log:
    D-Client v1.61 (0021)

    Turn off the phone.
    Hold its C-button and connect it to the cable within 30 seconds.

    EPI opened & EPI thread started.
    ASIC: db3150
    Boot mode: EROM
    Color: Undefined
    Error occured...
    EPIUSB connection closed
    (4873F1EE)
    Phone boot failed. (7BE142D6)

    Program finished with error. Disconnect cable and remove battery from the phone.

    What is wrong?

  2. #2
    Advanced user
    Join Date
    Aug 2008
    Device
    W890i
    Posts
    158
    Thanks
    3
    Thanked 36 Times in 22 Posts

    Re: Can't debrand w910i blue52

    The Ultimate Unlocker had a problem that made phones change to factory state.

    You can try to flash it with a setool box to see if it helps you.

  3. The Following User Says Thank You to Willin08 For This Useful Post:


Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •