dead k790a... wont flash :(

[balhar]

it wouldnt recognize my phone so
i did an EROM flash first


13:50:30| Baseband ID: 9900
13:50:30| Protocol Version: 3.1
13:50:30| Phone name detected!
13:50:30|
13:50:30| Profiling SEMC phone...
13:50:30| Platform: DB2020
13:50:30| OTP CID: 49
13:50:30| EROM CID: 52
13:50:30| EROM Color: Red
13:50:30| IMEI: 35220801xxxxxx
13:50:30| Phone ID: K790
13:50:30| Region: AMERICA_2
13:50:30| CDA: CDA102239/43 R15A
13:50:30| Firmware Version: R1GB001
13:50:30| EROM: R3A016
13:50:30| Ready for operation!




then the file system, flash and custpack

14:06:11| Sending db2020_cid01_prodid_p3j.bin...
14:06:11| Applet ID: 070129 0950 NGUCXC1250330_DB2020_PRODUCTIONIDLOADER_P3J
14:06:11| This is a PRODUCTION_ID loader
14:06:11|
14:06:11| Sending db2020_mem_patcher_cid52_r2a006.bin...
14:06:12| Applet ID: 061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
14:06:12| This is a MEM_PATCHER loader
14:06:12|
14:06:12| Sending db2020_cid52red_flash_r2a005.bin...
14:06:12| Applet ID: 061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
14:06:12| This is a FLASH loader
14:06:12| Now flashing firmware main...
14:06:12| Flashing c:\users\munroop\desktop\k790_r1gb001_main_generic _ev_red52.mbn
14:06:12| Header type: BABE
14:06:12| 455 flashblocks
14:09:55| Finishing flash
14:09:55| Done flashing
14:09:55| Now flashing filesystem...
14:09:55| Flashing c:\users\munroop\desktop\k790_r1gb001_fs_america_2 _red51.fbn
14:09:55| Header type: BABE
14:09:55| 213 flashblocks
14:09:55| Binary acknowledge failed with: 89
14:09:55| Failed
14:09:55| Binary acknowledge failed with: 68
14:09:55| Command: Error 0x68
14:09:55| Failed sending flashblock 1. Returnvalue 0x2EA617C
14:09:55| Finishing flash
14:09:56| Binary acknowledge failed with: 02
14:09:56| Failed
14:09:56| Failed
14:27:17| Error: Flashing failed
14:27:17| Disconnected... Unplug the phone



what does it mean?
is there anything i can do?