I tried to unlock the phone using XS+++ and Setool lite as per instructions from guy on Ebay
All went OK until the last minute when something failed- and since then I cant turn the phone on. Al.so it keeps failing when trying to reflash it
I have logs below if that gives anyone any clues
FROM SETOOLS
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35282601486015 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:2019
Flash props sent ok
CID52 BYPASS PROCEDURE STARTED
Processing part1...
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
Processing part2...
Processing part3....
OTP LOCKED:1 CID:49 PAF:1 IMEI:35282601486015 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:2019
Flash props sent ok
verify block error
last blk:44610000,00010000
CID52 BYPASS PROCEDURE FINISHED
and from XS++
18:00:40| Attempting to open the interface...
18:00:40|
18:00:40| TURN OFF PHONE!
18:00:40| Hold 'C' button on phone and connect phone NOW.
18:00:40| You have 30 seconds...
18:00:40|
18:00:43| Baseband ID: 9900
18:00:43| Protocol Version: 3.1
18:00:44| Phone name detected!
18:00:44|
18:00:44| Profiling SEMC phone...
18:00:44| Platform: DB2020
18:00:44| OTP CID: 49
18:00:44| EROM CID: 52
18:00:44| EROM Color: Red
18:00:44| IMEI: 35282601xxxxxx
18:00:44| Phone ID: W850
18:00:44| Region: T_MOB_INT_A
18:00:44| CDA: CDA102677/26 R8A
18:00:44| Firmware Version: R1ED001
18:00:44| EROM: R3A016
18:00:44| Ready for operation!
18:00:48| ~~~~~~~~~~ Custpack information ~~~~~~~~~~
18:00:48| Custpack: APAC (CDA102568/101) (W850)
18:00:48| Generic(non-branded) custpack: Yes
18:00:48| Allowed languages: en, ms, id, tl, vi, zs,
18:00:48| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
18:00:50| ~~~~~~~~~~ Custpack information ~~~~~~~~~~
18:00:50| Custpack: EUROPE_2 (CDA102568/11) (W850)
18:00:50| Generic(non-branded) custpack: Yes
18:00:50| Allowed languages: en, fr, de, tr, st, zu,
18:00:50| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
18:00:51|
18:00:51| Sending db2020_cid01_prodid_p3j.bin...
18:00:51| Applet ID: 070129 0950 NGUCXC1250330_DB2020_PRODUCTIONIDLOADER_P3J
18:00:51| This is a PRODUCTION_ID loader
18:00:51|
18:00:51| Sending db2020_mem_patcher_cid52_r2a006.bin...
18:00:51| Applet ID: 061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
18:00:51| This is a MEM_PATCHER loader
18:00:51|
18:00:51| Sending db2020_cid52red_flash_r2a005.bin...
18:00:51| Applet ID: 061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
18:00:51| This is a FLASH loader
18:00:51| Now flashing firmware main...
18:00:51| Flashing c:\users\sam lewis\desktop\w850_r1kg001_main_generic_cy_red52.m bn
18:00:51| Header type: BABE
18:00:52| 460 flashblocks
18:08:57| Error: Flashing failed
18:08:57| Disconnected... Unplug the phone
That gets to varying amount of "sending blocks" then the windows disconnect sound comes and it hangs before the error pops up