Help!~ My phone can't be identified by Se Tool 2 Lite

[carben]

My phone is w660i from 3.
But it couldn't be identified both by SE Tool 1.11(download from here)and XS++ (v3.2).

SE tool says:

"Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit Index of ./ and buy FULL.

unknown ChipID (C900), RETRY
Can't load ID loader !
Elapsed:6 secs."



There's some information of my phone
"
R1ED001
prg12029712_HUTCHISON_CE R1ED001

EROM:1200-4341
SEMCOBOOT R6A013

ITP SW VERSION:1201-8106 R1D141

CUSTOMIZATION:
1208-1161 R5A
1202-2362 R1ED0011E0W
"

Is there anything wrong with my phone?

What's meaning of "prg12029712_HUTCHISON_CE R1ED001"?

[Nicks]

Did you installed USB flash drivers?

[carben]

I used PC suit and updated the firmware. So there was no notie about new hardware.....

I put the driver into system32-drivers manually.

[91more]

reinstall the software on your computer

[ojay]

i think the problem is the driver. open device-manager and install "USB Flash Device Driver" manually.

[jasmin]

USB Flash Driver Installation - Guide

Have a nice day

[NtD]

You said you used XS++ 3.2 ? If you're talking about that leaked beta just don't do that ! You may brick your phone !

[riders4sia]

re-install the SEMC flash driver or download a driver from the download section and try to reload it with xs of setool. one more thing, if you've updated it with SEUS, the worst is that you can't mod or patch your phone as it would be upgraded to CID53, so no chance to CID53 users. but atleast try the 1st important thing, USB flash driver update

[djrulaz]

You said you used XS++ 3.2 ? If you're talking about that leaked beta just don't do that ! You may brick your phone !

False, is safe

[djrulaz]

MAy be a fast port dirty, try clean it (Fast port=USB dock)