Hi all,
I used Setoollite in order to flash my W850i.
The flash seems to work but now, each minutes the phone switch off and then automatically switch on...
Can someone help me with this issue?
Thanks in advance.
Sv
Hi all,
I used Setoollite in order to flash my W850i.
The flash seems to work but now, each minutes the phone switch off and then automatically switch on...
Can someone help me with this issue?
Thanks in advance.
Sv
Did you follow every step of sections 1. and 2. from this tutorial:
Flash your phone and How to apply or remove patch using SETool 2 Lite - Top Sony Forums ?
Hi,
thanks for the reply.
Ouch!! I am afraid the tutorial I used have bypassed the "Backup your GDFS..." section.
But for the rest I follow this procedure.
Could the issue of my phone have a link with GDFS?
How to solve my problem?
Thanks in advance.
SV
Post an identify log from Setool.
Hi sorry for the delay, I was out of home for a few days.
Here it is for the identify log:
Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
if you like LITE edition - please visit http://www.setool.net and buy FULL.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:35240101953783 CERT:RED
FLASH CID:52 COLOR:RED
Model:W850i
MAPP CXC article: R1KG001 prgCXC1250570_HUTCHISON_CY
MAPP CXC version: R1KG001
Language Package:EUROPE_2
CDA article: CDA102568/11
CDA version: R5A
Default article: cxc1250489
Default version: R1KC001
Network LOCKED
Operator: 208-01
Elapsed:7 secs.
Thanks for your help.
SV
First: flash your phone with these files:
W850_R1KG001_MAIN_GENERIC_CY_RED52
W850_R1KG001_FS_EUROPE_2_RED52
HB1-06_Gen_CDA102568_11_R5A_GENERIC_EUROPE_2
Then apply Quick Access Patch:
Don't forget Setool window, see what write....
And how apply patches ( after quick access patch ) :
![]()
Hello all,
any ideas?
SV
Hi,
sorry for the previous silly question...
Another question: on the second image you show me, could you tell me which of the main or the FS should I put in #4? On the same image could you telle me what directory of Setool folder I have to put at #5?
Waiting for that.
Thanks
SV
Hi Senter,
thanks for your help and sorry for the delay, I was out of home for few days.
I am affraid that the flash doesn't work. It helps with my phone because, some buttons (dial 2 for exemple) were out of order, and now it reworks.
But every 2 minutes the phone automatically switch off and switch on...
He re is the new identify.
Thanks in advance dor your advices and help.
Regards,
SV
Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
if you like LITE edition - please visit http://www.setool.net and buy FULL.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:35240101953783 CERT:RED
FLASH CID:52 COLOR:RED
Model:W850i
Brand:Sony Ericsson
MAPP CXC article: R1KG001 prgCXC1250200_GENERIC_CY
MAPP CXC version: R1KG001
Language Package:EUROPE_2
CDA article: CDA102568/11
CDA version: R5A
Default article: cxc1250489
Default version: R1KG001
Network LOCKED
Operator: 208-01
Elapsed:5 secs.
There are currently 1 users browsing this thread. (0 members and 1 guests)