Help me K510i flashing setool2lite

[philzfog]

after u have done that reflash it full and try a new battry

[Dainius__]

i can make reflash, but only with XS, and bigest problem is, that i can reflash main and fs, but i cant make finalize, i cant make finalization custumization, becouse xs stops all the time when in log window i saw letters "Activating file system..." maybe i can give you few xs logs? :)

[philzfog]

try to download a custom pack 4 it then keep it in rar fourm and add it to se tool light in the mics box and try to flash it se if that will do any thing

[Dainius__]

ok, first i go, to try connect phone via SEUS, because i were try to conect when i have bad gdfs...

and then i will try to flash custpack zip...

and then post here an result :)

[philzfog]

no u need to do the custom pack 1st buddie

[Dainius__]

ok, SEUS cant recognize my phone.

so there is 4 tryes to flash custpack by holding 2+5, after all of these tryes i reinsert batt..

bad luck..

ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
err: 36 (30)
loader prologue not accepted
phone pre-boot failed,possible RECOVERY needed.
Elapsed:3 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:3591********** CERT:RED
ldr_on_ldr hdr no ack (10)
Elapsed:3 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:3591********** CERT:RED
phoneid error 1
Phone info read error ! PLEASE CHECK MODEL !
Elapsed:4 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
phone pre-boot failed,possible RECOVERY needed.
Elapsed:43 secs. 

btw, i were selected k510 on model box..

[Dainius__]

there is my 4 try's to flash by holding C button:

ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:3591********** CERT:RED
ldr_on_ldr hdr no ack (10)
Elapsed:4 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:3591********** CERT:RED
phoneid error 1
Phone info read error ! PLEASE CHECK MODEL !
Elapsed:3 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
loader header not accepted
phone pre-boot failed,possible RECOVERY needed.
Elapsed:6 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:3591********** CERT:RED
ldr_on_ldr hdr no ack (10)
Elapsed:15 secs. 

[philzfog]

ldr_on_ldr hdr no ack (10)
is low battry or bad cable or driver

[Dainius__]

ldr_on_ldr hdr no ack (10)
is low battry or bad cable or driver

Okey, tomorrow i collect w810 parts and will charge battery full, then i will come here again ;)
thank you ;)

[Dainius__]

ok, i were charged bttery, now i reflashed FS and MAIN, but when tryng to finalize customization, then xs writes ACTIVATING FILE SISTEM, and i leave phone for few hours few times this week, and i just cant flash custpack, btw, i get this on XS++ v3.2

12:12:38| Sending db2010_cid49red_cs_r3a010.bin...
12:12:38| Header: Error 0x10
12:12:38| Error: Customizing failed.
12:12:38| Error: Flashing failed
12:12:40| Disconnected... Unplug the phone 

and this

12:22:18| Sending db2010_cid00_prodid_p3l.bin...
12:22:18| Prologue: Failed 

12:12:38| Header: Error 0x10 what can it mean? :confused:

or this 12:22:18| Prologue: Failed?

ok, and now i go to try to do something with setool..

BTW, phone is turned ON after reflash main and fs, but just saw white screen, not blinking :D