BRICKED M600i

**Mike007** · 09-07-2008

Hi

I have trired to unbrand Vodafone M600i with the following method which worked for many people. i.e. Back up the phone -> go to SEUS and quit -> use XS++ to change the soft -> Then update and done. HOWERVER i have dont some stupid moves and there goes my phone !!!

what I did was the folowing :

Done a backup using PC Suit -> used SEUS to update the firmaware but instead of quitting i continued new Vodafone update that was recomended by SEUS and at 53% i just disconnected the lead and from then bang ! when i try to press power button and C then the phone flashes (keyboard + screen) and does that few times and dies ! another worse thing is that the battery was not fully charge during the update and when i want to charge it the keyboard and screen flashes as before THIS SUCKS and i know THAT I DID THIS AT MY OWN RISK, but please help

This phone meant to be given to someone but i doesnt work HELP :

Thanks ! V much if anyone manages to fix this problem.

**ryberto** · 09-07-2008

so i take it you cant connect to your computer by opening xs++ and holding c and connecting cable.

if you can't then it sounds totally bricked to me but if you can post your log and people may be able to help you mate.

**Mike007** · 09-07-2008

**ryberto** · 09-07-2008

So did you back up the GDFS before doing this.

**Mike007** · 09-07-2008

Nope I have followed the following link sorry if there is no link posting ?!

Debrand your W960 / P1 for FREE (or your P990, M600, W950) - Hapless band of staff and regulars

no backup on

I just followed this quide but on step 2 instead of qutting I have done a vodafone 53% update and disconnected then XS++ flash GW1 then phone dead SEUS AND XS++ read this phone only but i cannot switch it on ?! !!!

HELP :D

**ryberto** · 09-07-2008

well its obviously a bad flash but im not sure of your options without a backup of the gdfs.

you should always backup your gdfs no matter what anything ever says you should always do it.

so when the phones connected can you do anything with it like reflash.

**Mike007** · 09-08-2008

I can probably reflash but I dont know what to do now so if you could tell me step by step what to do I would tell you the outcome of what you told me and whether it works but thanks for help and if u know how to do anything please give me some advice.

**ryberto** · 09-08-2008

well i have never really had a bad flash like this and dont really know how a 53% vodafone flash would affect the firmware.

but in my opinion id reflash it but not do a vodafone update this time so just flash with the firmware you were flashing with, unless you can get it connected up to the updater and maybe update it fully and see if that helps.

hope you can get it working.

**Mike007** · 09-08-2008

Thanks I can probably reflash but I would need a step by step instruction so I dont mess up like?

open XS++
Connect Phone
Then do what ???

He he sorry but that was my first flash and messed up

thx

**Willin08** · 09-08-2008

You can try:

-Check you have full battery and good cables, clean ports.
-Open XS++
-Smartphone connect
-Connect your phone in flash mode.
Then, in the flash tab:
-Change CDA to generic world 1 with the latest firmware you can see there.
-Once you select it, press Run Script.
-After process ends, use SEUS to finally update firmware.

Hope it works

Thread: BRICKED M600i

Thread Tools

Display

BRICKED M600i

Re: BRICKED M600i

Re: BRICKED M600i

Re: BRICKED M600i

Re: BRICKED M600i

Re: BRICKED M600i

Re: BRICKED M600i

Re: BRICKED M600i

Re: BRICKED M600i

Re: BRICKED M600i

Thread Information

Users Browsing this Thread

Tags for this Thread

Posting Permissions