So using XS++ v3.1

Here's what I performed:

1) Flashed EROM (W580_RED_CID52_R3B024_EROM-FOTA_2007-03-12_11.bin)
2) Flashed Main (W580_R8BE001_MAIN_GENERIC_LA_RED52.mbn)
3) Also tried using a different battery, but I still get that damn red light and it won't start up. Am I doing this right??

Here's the log.


00:10:26| XS++ v3.1 (Darwin) Ready !
00:10:26| Executed on Microsoft Windows XP
00:10:45|
00:10:45| Attempting to open the interface...
00:10:45|
00:10:45| TURN OFF PHONE!
00:10:45| Hold 'C' button on phone and connect phone NOW.
00:10:45| You have 30 seconds...
00:10:45|
00:10:56| Baseband ID: 9900
00:10:56| Protocol Version: 3.1
00:10:57| Phone name detected!
00:10:57|
00:10:57| Profiling SEMC phone...
00:10:57| Platform: DB2020
00:10:57| OTP CID: 51
00:10:57| EROM CID: 52
00:10:57| EROM Color: Red
00:10:57| IMEI: xxxxxxxxxxxxxx
00:10:57| Phone ID: W580
00:10:57| Region: AMERICA_2
00:10:57| CDA: CDA102568/107 R8A
00:10:57| Firmware Version: R8BE001
00:10:57| EROM: R3A022
00:10:57| Ready for operation!
00:11:15|
00:11:15| Sending db2020_cid01_prodid_p3j.bin...
00:11:16| Applet ID: 070129 0950 NGUCXC1250330_DB2020_PRODUCTIONIDLOADER_P3J
00:11:16| This is a PRODUCTION_ID loader
00:11:16|
00:11:16| Sending db2020_mem_patcher_cid52_r2a006.bin...
00:11:16| Applet ID: 061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
00:11:16| This is a MEM_PATCHER loader
00:11:16|
00:11:16| Sending db2020_cid52red_flash_r2a005.bin...
00:11:16| Applet ID: 061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
00:11:16| This is a FLASH loader
00:11:16| Now flashing firmware main...
00:11:16| Flashing c:\gadgets\se\erom\w580_red_cid52_r3b024_erom-fota_2007-03-12_11.bin
00:11:16| Header type: BABE
00:11:16| 4 flashblocks
00:11:18| Finishing flash
00:11:18| Done flashing
00:11:18| Flashing was successful
00:11:21| Disconnected... Unplug the phone
00:12:03|
00:12:03| Attempting to open the interface...
00:12:03|
00:12:03| TURN OFF PHONE!
00:12:03| Hold 'C' button on phone and connect phone NOW.
00:12:03| You have 30 seconds...
00:12:03|
00:12:07| Baseband ID: 9900
00:12:07| Protocol Version: 3.1
00:12:08| Phone name detected!
00:12:08|
00:12:08| Profiling SEMC phone...
00:12:08| Platform: DB2020
00:12:08| OTP CID: 51
00:12:08| EROM CID: 52
00:12:08| EROM Color: Red
00:12:08| IMEI: xxxxxxxxxxxxxx
00:12:08| Phone ID: W580
00:12:08| Region: AMERICA_2
00:12:08| CDA: CDA102568/107 R8A
00:12:08| Firmware Version: R8BE001
00:12:08| EROM: R3A022
00:12:08| Ready for operation!
00:12:26|
00:12:26| Sending db2020_cid01_prodid_p3j.bin...
00:12:26| Applet ID: 070129 0950 NGUCXC1250330_DB2020_PRODUCTIONIDLOADER_P3J
00:12:26| This is a PRODUCTION_ID loader
00:12:26|
00:12:26| Sending db2020_mem_patcher_cid52_r2a006.bin...
00:12:27| Applet ID: 061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
00:12:27| This is a MEM_PATCHER loader
00:12:27|
00:12:27| Sending db2020_cid52red_flash_r2a005.bin...
00:12:27| Applet ID: 061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
00:12:27| This is a FLASH loader
00:12:27| Now flashing firmware main...
00:12:27| Flashing c:\gadgets\se\firmware\r8be001\w580_r8be001_main_g eneric_la_red52.mbn
00:12:27| Header type: BABE
00:12:27| 460 flashblocks
00:16:22| Finishing flash
00:16:22| Done flashing
00:16:22| Flashing was successful
00:16:24| Disconnected... Unplug the phone