Yes i can connect it to the XS++ and SUES here is the log if that enough THANKS FOR INTEREST !
I did try too many things and my log is long so i send you last few tries to save it :D
12:29:00| XS++ v3.1 (Darwin) Ready !
12:29:00| Executed on Microsoft Windows XP
12:29:06| Executing SEMC Smartphone Operations!
12:29:06| Please hold boot key ('@' or 'C') and connect device...
12:29:34| Disconnected... Unplug the phone
12:29:42| Executing SEMC Smartphone Operations!
12:29:42| Please hold boot key ('@' or 'C') and connect device...
12:30:10| Disconnected... Unplug the phone
12:30:31| Executing SEMC Smartphone Operations!
12:30:31| Please hold boot key ('@' or 'C') and connect device...
12:30:43| Master Port detected: COM8
12:30:43| Slave Port detected: COM9
12:30:43| Opening Port!
12:30:43| INIT MASTER...OK!
12:30:43| PHONE INFO SAMPLED...OK!
12:30:43| EPOC APPLET HEADER SENT...OK!
12:30:43| APPLET BODY SENT...OK!
12:30:43| SHUTTING DOWN MASTER...OK!
12:30:45| Baseband ID: 7100
12:30:45| Protocol Version: 3.1
12:30:46| Speed set to 460800
12:30:46|
12:30:46| Sending db2000_cid03_prodid_p3b.bin...
12:30:48| Applet ID: 070410 1354 NPACXC125871_DB2000_PRODUCTIONIDLOADER_P3B
12:30:48| This is a PRODUCTION_ID loader
12:30:48| Activating GDFS...
12:30:48| Phone name detected!
12:30:48|
12:30:48| Profiling EPOC smartphone...
12:30:48| Platform: DB2001
12:30:48| OTP CID: 49
12:30:48| EROM CID: 49
12:30:48| EROM Color: Red
12:30:48| IMEI: 35931500xxxxxx
12:30:48| Phone ID: M600
12:30:48| Part Number: FAD-3022012-BV
12:30:48| Phone smartphone version: R1E01
12:30:48| Phone software version: CXC162037 R9F011
12:30:48| Processing Unit: CXC162098 R6A03
12:30:48| Bluetooth:
12:30:48| Organizer: CXC162071 R6A16
12:30:48| CDA: CDA162011/1 R6A13
12:30:48|
12:30:48| ... and the phone lock code is: 0000
12:30:48|
12:30:48| Ready for operation!
12:31:32|
12:31:32| Sending db2001_cid49red_cs_p1e.bin...
12:31:48| Applet ID: 070405 1245 NPA1_CXC1327363_1_SEMC_CS_LOADER_1_P1E
12:31:48| This is a CHIPSELECT loader
12:31:48| Activating loader...
12:31:48| Activating GDFS...
12:31:48| This loader is UNLOCKED
12:31:48| Restoring the GDFS...
12:31:48| Attempting to write 1701987131 variables...
12:31:56| Failed: Block 0x61 Unit 0x6574
12:31:56| Wrote 1 variables!
12:31:56| GDFS was restored successfully!
12:31:56| GDFS operation was successful
12:31:58| Disconnected... Unplug the phone
12:32:25| XS++ v2.0 Ready !
12:32:25| Executed on Microsoft Windows XP
12:32:32| Executing SEMC Smartphone Operations!
12:32:32| Please hold boot key ('@' or 'C') and connect device...
12:32:47| Master Port detected: COM8
12:32:47| Slave Port detected: COM9
12:32:47| Opening Port!
12:32:47| Init master...Init OK!
12:32:47| Aquiring phone info...Info sampled OK!
12:32:47| Sender application header...Sent OK!
12:32:47| Sending application...
12:32:47| Sending db2000_application1_epoc.bin...
12:32:47| Sent OK!
12:32:47| Shutting down...Master Shutdown OK!
12:32:49| Baseband ID: 7100
12:32:49| Hardware Platform: DB2000 Smartphone
12:32:49| Protocol Version: 3.1
12:32:50| Speed set to 460800
12:32:50|
12:32:50| Sending db2000_cid03_prodid_p3b.bin...
12:32:52| Applet ID: 070410 1354 NPACXC125871_DB2000_PRODUCTIONIDLOADER_P3B
12:32:52| This is a PRODUCTION_ID loader
12:32:52| Activating GDFS...
12:32:52| Phone name detected!
12:32:52|
12:32:52| Profiling EPOC smartphone...
12:32:52| Baseband ID: DB2001
12:32:52| OTP CID: 49
12:32:52| EROM CID: 49
12:32:52| EROM Color: Red
12:32:52| IMEI: 35931500xxxxxx
12:32:52| Phone ID: M600
12:32:52| Part Number: FAD-3022012-BV
12:32:52| Phone smartphone version: R1E01
12:32:52| Phone software version: CXC162037 R9F011
12:32:52| Processing Unit: CXC162098 R6A03
12:32:52| Bluetooth:
12:32:52| Organizer: CXC162071 R6A16
12:32:52| CDA: CDA162011/1 R6A13
12:32:52|
12:32:52| ... and the phone lock code is: 0000
12:32:52|
12:32:52| Ready for operation!
12:33:02| Shutting down...
12:34:05| Sendinging shutdown signal to phone...
12:34:05| Done.. You may now connect again...
12:34:05| Shutting down...
12:35:20| XS++ v3.1 (Darwin) Ready !
12:35:20| Executed on Microsoft Windows XP
12:35:30| Executing SEMC Smartphone Operations!
12:35:30| Please hold boot key ('@' or 'C') and connect device...
12:35:40| Master Port detected: COM8
12:35:40| Slave Port detected: COM9
12:35:40| Opening Port!
12:35:40| INIT MASTER...OK!
12:35:40| PHONE INFO SAMPLED...OK!
12:35:40| EPOC APPLET HEADER SENT...OK!
12:35:40| APPLET BODY SENT...OK!
12:35:40| SHUTTING DOWN MASTER...OK!
12:36:02| Error: Server not found!
12:36:04| Error: Server not found!
12:36:08| Sorry, your phone is NOT SUPPORTED
12:36:08| Sendinging shutdown signal to phone...
MAY BE MESSED UP AND NEEDS REPAIRING IF ITS POSSIBLE BUT TAKE A LOOK