K8001 bricked - divorce imminent

[macdrew]

Flushed with success at unlocking debranding my own K8001, I did the "other half's" as a surprise, I bricked it, and am now in danger of having it tied round my neck and thrown off a bridge into the river.

Logs from SeTools lite are below, XS++ opens, then stalls, KKC will open pressing 5 & 2 but tells me to press C, which does nothing, Far log is below.

Is repair possible via Internet/Software?

Any suggestions would be very gratefully received and may forestall divorce.


Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit Index of ./ and buy FULL.

ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:353427*********** CERT:N/A
FLASH CID:52 COLOR:RED
IMEI MISMATCH ! GDFS IMEI:359757*************

Model:K800i
Brand:Orange
MAPP CXC article: R1JC002 prgCXC1250212_ORANGE_WI
MAPP CXC version: R1JC002
Language Package:ORANGE_GEN
CDA article: CDA102511/47
CDA version: R20A
Default article: cxc1250490
Default version: R1JC002

Network LOCKED
Operator: 260-06

Elapsed:7 secs.
ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35342********** CERT:N/A
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
loader startup: executed
loader GDFS startup: executed
smth wrong with usercode reset,error is: 1
Elapsed:45 secs.

XS++ Log

15:13:32| XS++ v3.1 (Darwin) Ready !

15:13:32| Executed on Microsoft Windows XP

15:13:41|

15:13:41| Attempting to open the interface...

15:13:41|

15:13:41| TURN OFF PHONE!

15:13:41| Hold 'C' button on phone and connect phone NOW.

15:13:41| You have 30 seconds...

15:13:41|

15:14:01| Baseband ID: 9900

15:14:01| Protocol Version: 3.1

15:14:18| Sorry, your phone is NOT SUPPORTED

15:14:18| Sendinging shutdown signal to phone...

15:14:20| Shutting down...

10:32:23| XS++ v3.1 (Darwin) Ready !

10:32:23| Executed on Microsoft Windows XP

10:32:33|

10:32:33| Attempting to open the interface...

10:32:33|

10:32:33| TURN OFF PHONE!

10:32:33| Hold 'C' button on phone and connect phone NOW.

10:32:33| You have 30 seconds...

10:32:33|

10:32:39| Baseband ID: 9900

10:32:39| Protocol Version: 3.1

14:37:25| Disconnected... Unplug the phone

14:37:37| Shutting down...

FAR -Log

log started. plugin compiled Jun 9 2008 / 19:47:22

create session object
used script: db2020.xml

turn off the phone, hold "c" button and plug usb cable

found EPIUSB1

connecting...

got response

protocol: 0301 baseband: 9900

cid detect
<- cid=52 color=unknown platform=db2020

error: SetDirectory(setdir(setmode(db2020_52(aborted))))