K800i dead, Flashing infrared,

[marn]

Hi
It seem the erom is damage.
so install semc driver then use 2+5 and click unlock\repair in setool2lite.

[devilbade]

I know.
The drivers do not install, when I right-click then click install on 'ggsemc.inf' an error appears saying, "The INF file you selected does not support this method of installation."

And SETools doesn't detect my phone when i hold down 'C' or '2+5'

:(

[SeaMonkey]

I know.
The drivers do not install, when I right-click then click install on 'ggsemc.inf' an error appears saying, "The INF file you selected does not support this method of installation."

And SETools doesn't detect my phone when i hold down 'C' or '2+5'

:(

Try change USB port and install drivers again

[activeforc]

I know.
The drivers do not install, when I right-click then click install on 'ggsemc.inf' an error appears saying, "The INF file you selected does not support this method of installation."

And SETools doesn't detect my phone when i hold down 'C' or '2+5'

:(

Hi,

Dont panic, just make sure you have the drivers correctly installed. You can try it on a different pc or laptop?

Once you have the driver correctly installed...

Open Setools lite and connect your phone using 2+5 keys and re-flash your eprom (bios) once Setools fixes your broken EPROM you will be able to connect using C key...

you can also use xs++ to fix your eprom, just download the correct eprom (bios) from topsony.com and proceed to flash your eprom, there's a tutorial online on how to flash your eprom using xs++

Remember you have to fix your EPROM first...

If you find my post usefull use the thank you button bellow