K800i dead, Flashing infrared,

[devilbade]

Hey,
Recently my K800i went dead after I took the battery out then put it back in again, now everytime I press the 'ON' button, a red light flashes from the infrared port.

I looked online for help and came across SETools Lite 2, I have the latest version and it doesn't detect my phone.
I then installed USB Flash Drivers, but it says that "GGSEMC.inf does not support this method of installation.", so I manually placed the files in the directories and still my PC does not detect my phone.

I have used Device Manager but nothing comes up on that.
Im using Vista Premium...

Help would be appreciated :)

[simox]

Check out the REPAIRING EROM GUIDES for most sonyericsson phones thread.

[blitz697]

Welcome to SEtool2 ( LITE edition ) v 1.10
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit Index of ./ and buy FULL.

ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35731501773734 CERT:N/A
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok

CID52 BYPASS PROCEDURE STARTED
Processing part1...
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
Processing part2...
Processing part3....
BOOTROM MODE DETECTED
OTP LOCKED:1 CID:49 PAF:1 IMEI:35731501773734 CERT:N/A
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok

REMOVE CABLE FROM PHONE
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

HOLD "C" BUTTON AND ATTACH PHONE

CID52 BYPASS PROCEDURE FINISHED

ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
Trying to launch embedded bootloader...
embedded flashloader not responds !
Elapsed:419 secs.

Hi guys..im a complete noob at this.. my k800i has shutdown completely i can only connect it to setool because my pc doesn't read it when i use the "c" function. only the 2+5 keys. I tried flashing my main and fs with setool. and this is what the log showed me. Help Pleeeeeeeease!

[SeaMonkey]

@blitz697
Try with this way plz help... k810 is dead what can i do ? - Top Sony Forums by @senter

[marn]

Hi
It seem the erom is damage.
so install semc driver then use 2+5 and click unlock\repair in setool2lite.

[devilbade]

I know.
The drivers do not install, when I right-click then click install on 'ggsemc.inf' an error appears saying, "The INF file you selected does not support this method of installation."

And SETools doesn't detect my phone when i hold down 'C' or '2+5'

:(

[SeaMonkey]

I know.
The drivers do not install, when I right-click then click install on 'ggsemc.inf' an error appears saying, "The INF file you selected does not support this method of installation."

And SETools doesn't detect my phone when i hold down 'C' or '2+5'

:(

Try change USB port and install drivers again

[activeforc]

I know.
The drivers do not install, when I right-click then click install on 'ggsemc.inf' an error appears saying, "The INF file you selected does not support this method of installation."

And SETools doesn't detect my phone when i hold down 'C' or '2+5'

:(

Hi,

Dont panic, just make sure you have the drivers correctly installed. You can try it on a different pc or laptop?

Once you have the driver correctly installed...

Open Setools lite and connect your phone using 2+5 keys and re-flash your eprom (bios) once Setools fixes your broken EPROM you will be able to connect using C key...

you can also use xs++ to fix your eprom, just download the correct eprom (bios) from topsony.com and proceed to flash your eprom, there's a tutorial online on how to flash your eprom using xs++

Remember you have to fix your EPROM first...

If you find my post usefull use the thank you button bellow

[mantas32]

there is tut about usb drivers install
DavinciTeam - Welcome on our Site.....