W880 turns itself OFF

[joabel]

I just got this W880i, I flashed it and unlcok it everything good. but a few days ago i started turning itself off like I have it in my pocket and go to see what time is it and there it is turned off. I shook it hardly to see if it was the battery, moved the battery almost getting it out of the phone but the phone didnt turn off.

First I Flashed it with R1KG001 thougth is a bug and flashed it with R1JC002 to see how it works...

During the flashing I noticed that there are 3 THREE BLOCKS PATCHED when I always get only 2 is that Idid something wrong please advice ppl..

This is the log.. Thanks in advance any help is welcome..


Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit Index of ./ and buy FULL.

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI:35578501501078 CERT:RED
FLASH CID:52 COLOR:RED

Model:W880i
Brand:Sony Ericsson
MAPP CXC article: R1JC002 prgCXC1250640_GENERIC_AI
MAPP CXC version: R1JC002
Language Package:AMERICA_2
CDA article: CDA102568/107
CDA version: R6A
Default article: cxc1250651
Default version: R1JC002

Extended LOCKED
Operator: MULTIPLE

Elapsed:10 secs.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35578501501078 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok

CID52 BYPASS PROCEDURE STARTED
Processing part1...
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
Processing part2...
Processing part3....
OTP LOCKED:1 CID:51 PAF:1 IMEI:35578501501078 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok

REMOVE CABLE FROM PHONE
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

HOLD "C" BUTTON AND ATTACH PHONE

CID52 BYPASS PROCEDURE FINISHED

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDR:DB2020_PRELOADER_FOR_SETOOL2
LDR:DB2020 LOADER FOR SETOOL2
Flash ID check:897E
Flash props sent ok
writing G:\celular\CELULARES\DESBLOQUEO SE\Setool2lite V1.11\qamaker\W880_R1JC002_MAIN_GENERIC_AI_RED52.m bn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:9200
Will flash 460 blocks...
SSW loading returns:0
Going to execute VKP script....
Starting to process VKP patch script: G:\celular\CELULARES\DESBLOQUEO SE\Setool2lite V1.11\qamaker\quick_access_W880_R1JC002.vkp
VKP script loaded OK. Lines: 1637
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44140000
New block #0001 added: $45C80000
New block #0002 added: $45CC0000
Blocks selected OK. Reading blocks: 3
Blocks readed to memory OK. Checking contents...
Blocks patched OK. Start writing...
Block 0 written
Block 1 written
Block 2 written
VKP script executed OK
Elapsed:1413 secs.
Going to execute VKP script....
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDR:quick access patch by den_po
FLASH CID:52 COLOR:RED
OTP LOCKED:1 CID:51 PAF:1 IMEI:35578501501078 CERT:RED
LDR:DB2020 LOADER FOR SETOOL2
Starting to process VKP patch script: G:\celular\CELULARES\DESBLOQUEO SE\vkp\Remove_SIM_lock_W880_R1JC002.vkp
VKP script loaded OK. Lines: 6
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44700000
Blocks selected OK. Reading blocks: 1
Blocks readed to memory OK. Checking contents...
Blocks patched OK. Start writing...
Block 0 written
VKP script executed OK
Elapsed:19 secs.


TY:o

[simox]

During the flashing I noticed that there are 3 THREE BLOCKS PATCHED when I always get only 2 is that Idid something wrong please advice ppl..

There is nothing wrong, because the 0, 1 and 2 blocks are written to phone. So this is actually equal with 3 ;)

About the turning off problem: probably the problem is caused by the mismatching MAIN and FS. I suggest you to reflash the phone completely(MAIN, FS, custom pack), then unlock it again. But first backup the user data(contact list, ring tones or anything you need) form phone memory.

[chingy]

Haha!!! that is 3 blocks being flashed. Essentially "block 0" is block 1 and "block 1" is blok 2 and so on. hmmm...the phone switching off like that is wierd, could be mismatch (doubt so though). It could be that the battery is damaged (not lose or anything like that, like the internal parts of the battery-memory-). My old nokia use to do that and i just bought a new battery and all sorted. Try see if a friend has a similar phone and test your phone with his or her battery. Hope you solve it soon