two question please help

[0174796853]

i have a problem with the flashing
here is the log :

21:23:22| TURN OFF PHONE!

21:23:22| Hold 'C' button on phone and connect phone NOW.

21:23:22| You have 30 seconds...

21:23:22| 

21:23:26| Baseband ID: 9900

21:23:26| Protocol Version: 3.1

21:23:26| Phone name detected!

21:23:26| 

21:23:26| Profiling SEMC phone...

21:23:26| Platform: DB2020

21:23:26| OTP CID: 49

21:23:26| EROM CID: 52

21:23:26| EROM Color: Red

21:23:26| IMEI: 35240101xxxxxx

21:23:26| Phone ID: W850

21:23:26| Region: VFE_LIVE_2

21:23:26| CDA: CDA102677/69   R6A

21:23:26| Firmware Version: R1EJ001

21:23:26| EROM: R3A016

21:23:26| Ready for operation!

21:23:48| 

21:23:48| Sending db2020_cid01_prodid_p3j.bin...

21:23:48| Prologue: Failed

21:23:48| Sending PRODUCTION_ID LOADER

21:23:48| 

21:23:48| Sending db2020_cid01_prodid_r3a.bin...

21:23:48| Prologue: Failed

21:23:48| 

21:23:48| Sending db2020_mem_patcher_cid52_r2a006.bin...

21:23:48| Prologue: Failed

21:23:48| 

21:23:48| Sending db2020_cid52red_flash_r2a005.bin...

21:23:48| Prologue: Failed

21:23:48| Error: Cannot send flash loader

21:23:48| Error: Flashing failed

21:23:50| Disconnected... Unplug the phone

P.S.
its riqlock
from other member :]

[SeaMonkey]

Try to reinstall flash driver and change USB port,clean connector on phone and try again or with Setool2lite.But first do backup of GDFS wright now

[0174796853]

Try to reinstall flash driver and change USB port,clean connector on phone and try again or with Setool2lite.But first do backup of GDFS wright now

I use XS++ 3.2 and it work fine i flashed my W850 and i get the hebrew lang BUT
when i turn on the phone after i choose normal mode it says :
error with the definition something like that and also says: reffer to the S.P.
and i can do noting with the phone what i need to do ?

[SeaMonkey]

I use XS++ 3.2 and it work fine i flashed my W850 and i get the hebrew lang BUT
when i turn on the phone after i choose normal mode it says :
error with the definition something like that and also says: reffer to the S.P.
and i can do noting with the phone what i need to do ?

First of all - why using XS++3.2 (this is beta) - use XS++3.1 (Darwin)

[riqlock]

First of all - why using XS++3.2 (this is beta) - use XS++3.1 (Darwin)

it dosent work on XS++ 3.1
i read tut that i need to complet phone

"AFTER THE SOFTWARE FINISH TO FLASH YOU NEED TO COMPLETE THE PHONE AFTER FLASH
( IF YOU DONT DO THIS WHEN YOU TURN ON THE PHONE THE PHONE SAIDS “ PLEASE CONTACT PROVIDER “ OR SOMETHING LIKE THIS )
"

how i do it cuz it say to me :"please contact with P.S."

[SeaMonkey]

it dosent work on XS++ 3.1
i read tut that i need to complet phone

how i do it cuz it say to me :"please contact with P.S."

Than you didn't use custpack,because with custpack you finalize flashing,so find one that match with your FS and finalize flashing