You will all hate me for This?

[abidin786]

Hi! There i know i should have read the tutorials before doing anything, and that is exactly what i did i followed all the tutorials to sim unlock my W810i but when i created and applied the unlock patch to my phone using the Setool2 and simlockpatchgenerator the phone is locked or bricked. Before doing anything i also created a backup of my phone using XS++.
NOW THIS MESSAGE IS APPEARING ON MY PHONE WHEN I TURN IT ON

"Configuration error. Please contact your network
operator or service center."


I cannot contact them because i recently changed my phone service.
Your help is greatly appreciated thanks again for helping out a kid.

P.S. i need the phone before next Wednesday because i'm off to college.

[Beep88]

If you do a search here (or on the net), you'll find that the error shows up because you did not flash a Customization Pack (custpack).

Pick a proper customization pack and flash it.

[snk951]

remember you need to check if the pack has the language you need, or want, whatever the case might be.

later

[jasmin]

You must finalize your phone:

Finalization = Completing flashing operations and storing basic settings that phone needs to properly operate [i.e. security certificates, (and this is why phone displays "configuration error" if it is not properly done)].

Firmware has two parts:
1. FS: It contains languages, images, sounds, animations, settings, etc. Anything that isn't pure software.
2. Main: It contains the software.

Note: MAIN and FS HAVE to be the same software version
MAIN R1BC002
FS R1BC002
Customization has to be same region as FS, in this case
FS = EU5 (EUROPE_5)
Customization =CDA102338/50 ( EUROPE_5 Sunrise Switzerland)

Nice day

[SaNdSuKkA]

As above users have said, you need to finalize phone by flashing appropriate cust pack.
Please thank those inviduals if their advice helped.

And yes, we hate you! Hehe j/k :p

[futuramax]

You need to finalize your phone. Try this tutorial

[abidin786]

Thanks again for replying everyone. Can someone give me directions to download the file pack from the download sections the phone is cingular in USA i can't check the CID anymore cause its not connecting to XS++ ot the stelltool.

[hyperion17]

The custpack is the same for CID 49 or 50. You need to use the custpack according with the FS you flashed:for example, if you used W810_R4ED001_FS_AMERICA_1_RED49 , you must flash W810_CDA102555_106_R2A_Generic_AMERICA_1 , if you used W810_R4ED001_FS_EUROPE_1_RED49, you must flash W810_CDA102555_10_R2A_Generic_EUROPE_1

[abidin786]

the phone is not connecting to any of the tools by holding C and connecting the cable how do i upload the custom pack on the phone now.

[jasmin]

Change usb ports and then tried to connect.

Nice day