I think I just bit myself in the... W580i

[EdgPaez]

@Rogue7
Please upload Setol LOG, xs++ almost always shows IMEI MISSMATCH, most of it is not ;)
Regards

[Rogue7]

@Rogue7
Please upload Setol LOG, xs++ almost always shows IMEI MISSMATCH, most of it is not ;)
Regards

I did upload the Setool log (that's the first log in the first post)

[Rogue7]

I think I might have found the problem. Although I'm not sure how to fix it.
The XS++ log in post #15 shows the following line of code when I load my custom pack...

10:02:58| Custpack: AMERICA_2 (CDA102460/101) (K510)

I believe the custom pack is wrong because it states K510. However I have a W580.
When I looked up the K510 i found that it's native resolution is 128x160 pixels, but my W580's native resolution is 240x320 pixels. This might explain why my screen is distorted and stretched.

But I'm confused as to how to fix this. The custompack I used is straight from this site and is labeled w580. Is the custompack on this site wrong?

[SeaMonkey]

I think I might have found the problem. Although I'm not sure how to fix it.
The XS++ log in post #15 shows the following line of code when I load my custom pack...

10:02:58| Custpack: AMERICA_2 (CDA102460/101) (K510)

I believe the custom pack is wrong because it states K510. However I have a W580.
When I looked up the K510 i found that it's native resolution is 128x160 pixels, but my W580's native resolution is 240x320 pixels. This might explain why my screen is distorted and stretched.

But I'm confused as to how to fix this. The custompack I used is straight from this site and is labeled w580. Is the custompack on this site wrong?

You didn't choose your phone in Setool ,stayed k510 so try change to your phone and upload custpack one more time.If that don'work you need one more time do full flash but this time be very carefully

[Rogue7]

You didn't choose your phone in Setool ,stayed k510 so try change to your phone and upload custpack one more time.If that don'work you need one more time do full flash but this time be very carefully

I'm pretty sure I did. Even so, I did it again (in SEtool) making sure that w580 was selected, and I still have this screen problem. How does doing one more flash fix this? I've flashed this bugger at least 7 times now.