w580i

[Passowa]

Hi everyone,

I've been reading a lot of topics here but I still don't understand how I can flash my w580i :rolleyes:
I bought it in a Mobistar Center here in Belgium and a lot of functions are disabled :mad:
Already downloaded XS++ and the flash driver but my phone just won't connect with it.
It just starts to recharge, so pressing the C-button doesn't work.
I'm also not sure wich files I need (dutch)
Help? :p

grtz,
Ellen

[harper1988]

First you need to download drivers for your computer to detect the phone. Then when you connect the phone: first turn off the phone, take out the battery, put the battery back in, DO NOT TURN ON, press and hold the C button, then plug in the USB to the phone.

[hyperion17]

You need :
W580_R8BE001_MAIN_GENERIC_LA_RED52
W580_R8BE001_FS_EUROPE_3_RED52
HB1-06_Gen_CDA102568_12_R8A_GENERIC_EUROPE_3 , or

W580_R8BE001_MAIN_GENERIC_LA_RED53
W580_R8BE001_FS_EUROPE_3_RED53
HB1-06_Gen_CDA102568_12_R8A_GENERIC_EUROPE_3 , according to your EROM CID.

[Passowa]

when I want to install the flash driver, it says I need wdfcoinstaller01007.dll :confused:

[hyperion17]

In the "USB flash driver" folder you must have a folder called "x86"(1,38MB), a file called "ggsemc"(14kb) and a file "setup information"(5kb). Right click on the last one and choose "install" option.

[Passowa]

thx, installation completed :)
I found those 2 files but can't find the 3rd one...
HB1-06_Gen_CDA102568_12_R8A_GENERIC_EUROPE_3

[Passowa]

Ok, I flashed my phone and I think one of the files was for America...
I inserted my simcard and it said:

configuration error. please contact your network operator or service center

what should I do now??

18:02:04| Hold 'C' button on phone and connect phone NOW.
18:02:04| You have 30 seconds...
18:02:04|
18:02:04| Baseband ID: 9900
18:02:04| Protocol Version: 3.1
18:02:05| Phone name detected!
18:02:05|
18:02:05| Profiling SEMC phone...
18:02:05| Platform: DB2020
18:02:05| OTP CID: 51
18:02:05| EROM CID: 52
18:02:05| EROM Color: Red
18:02:05| IMEI: 35928501xxxxxx
18:02:05| Phone ID: W580
18:02:05| Region: ORANGE_GEN
18:02:05| CDA: CDA102774/110 R4A
18:02:05| Firmware Version: R8BE001
18:02:05| EROM: R3A022
18:02:05| Ready for operation!
18:02:14| ~~~~~~~~~~ Custpack information ~~~~~~~~~~
18:02:14| Custpack: AMERICA_2 (CDA102460/101) (K510)
18:02:14| Generic(non-branded) custpack: Yes
18:02:14| Allowed languages: en, pb, xl,

[hyperion17]

Try Setool2lite(easier interface) and "Add" the right MAIN and FS and put the right custom file to "MISC Files".

[Passowa]

i used the 2 mentioned here in the topic...
but the custpack indicates america...:confused:
and the right custom file? that is?

[SeaMonkey]

i used the 2 mentioned here in the topic...
but the custpack indicates america...:confused:
and the right custom file? that is?

You need to change phone model in XS++ from K510 to W580,or if there aren't your custpack download from download section