Phone Dead After Using Setools for patching

[socket32]

hi every body ,
i need your help about my w800 phone
i have using setool v1.11 for patching my phone with the patch:continue_radio_playing_w800_r1bd001.vkp
this is teh log :

Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit Index of ./ and buy FULL.

Going to execute VKP script....
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:3557#++++++++ CERT:RED
LDR:051207 0928 NPACXC1250165_1_SEMC_COMPACTFLASHLOADER R2B
Flash ID check:890D
Flash props sent ok

DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

Trying to launch embedded bootloader...
INT LDR:COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:890D
Flash props sent ok
FOUND: R1BD001_CXC1250092_EU_1_CA
Restore from:R1BD001_CXC1250092_EU_1_CA
can't open file "D:\w80\tools\setool2lite v1.11\rest\R1BD001_CXC1250092_EU_1_CA"
Starting to process VKP patch script: D:\w80\custom\patch\R1BD001\ok\radio without headset.vkp
VKP script loaded OK. Lines: 6
Patch structure created OK. Determining blocks to read...
New block #0000 added: $45120000
Blocks selected OK. Reading blocks: 1
Blocks readed to memory OK. Checking contents...
Blocks patched OK. Start writing...
Block 0 written
VKP script executed OK
Elapsed:109 secs.
Will backup GDFS now.
Abort all operations.
phone pre-boot failed,possible RECOVERY needed.
Elapsed:182 secs.
Will backup GDFS now.
phone pre-boot failed,possible RECOVERY needed.
Elapsed:150 secs.
Abort all operations.


After that my phone can't start and it cant be detected by setools or xs++
please help me

[marn]

Hi
reinstall semc driver and if it doesnt work use 2+5 and click repair in setool2lite.
friste remove that pach and if doesnt work so just add main and flash ur phone.

[simox]

Another problem is that there is no restoration file in [SeTool2Lite_folder]\rest folder for your MAIN. However you can make one with [SeTool2Lite_folder]\make_rest\ssw2rest.exe
Open a command prompt and invoke it as:

ssw2rest [path_to_MAIN]\[W800_MAIN_name] 44020000

You will get a R1BD001_CXC1250092_EU_1_CA file in [SeTool2Lite_folder]\make_rest\ folder. Copy it to [SeTool2Lite_folder]\rest folder. Reflash the MAIN firmware, then apply the patch again.

[hyperion17]

If you can't make the rest file by yourself, you can find it here: RapidShare: Easy Filehosting