This tutorial explains you how to make & mod ZAPF acoustics.For all those APF Modders & Newbies who want to make & mod ZAPF then here you go.

What you need:-

Win Hex http://www.x-ways.net/winhex.zip
ZAPF to APF Convertor Click Here Password : Mobile+Man

ZAPF Template for Win Hex Click Here Password : Mobile+Man

APF SUITE for GUI based Conversions Click Here Password : Mobile+Man


First of all download Win Hex & install it in its default location i.e. c:\program files\WinHex
Then download ZAPF template & put it in the above directory.
Now as a base acoustic download some ZAPF acoustic.Here im using w880's originals. Click Here Password : Mobile+Man

Lets start modding the PHF files[for headphones].Extract w880's acoustic & then select the files phf_play_*.zapf[1 to 4]& phf_play.zapf
Now use the zapf to apf convertor to convert it to apf so that it can be edited via Win Hex.just drag the files on unzapf.exe to convert.



Now open win hex & open the acoustic files.Goto view then select Template Manager.There select "ZAPF EDITOR"





Now in the editor there are many fields

"Version"
"ProfileSize"
"AcousticCompensation_TX_8"
"AcousticCompensation_TX_16"
"AcousticCompensation_RX_8"
"AcousticCompensation_RX_16"
"AcousticCompensation_RX_44_1"
"AcousticCompensation_RX_48"
"AcousticCompensation_RX_11_025"
"AcousticCompensation_RX_12"
"AcousticCompensation_RX_22_05"
"AcousticCompensation_RX_24"
"AcousticCompensation_RX_32"
"DRC_RX"
"DRC_RX_8kHz"
"DRC_TX_8kHz"
"EnhancedEchoCanceller"
"NoiseReduction"
"WhiningNoiseFilter"
"CTM"
"AccessoryType"
"BT_PCM_SampleRates"
"BT_PCM_Stereo"
"?"
"AcousticCompensation_TX_8_TD_Data"
"AcousticCompensation_TX_16_TD_Data"
"AcousticCompensation_RX_8_TD_Data"
"AcousticCompensation_RX_16_TD_Data"
"AcousticCompensation_RX_44_1_TD_Data"
"AcousticCompensation_RX_48_TD_Data"
"AcousticCompensation_RX_44_1_SecondChannel_TD_Dat a"
"AcousticCompensation_RX_48_SecondChannel_TD_D ata"
"AcousticCompensation_TX_8_SecondChannel_TD_Da ta"
"AcousticCompensation_TX_16_SecondChannel_TD_D ata"
"AcousticCompensation_RX_8_SecondChannel_TD_Da ta"
"AcousticCompensation_RX_11_025_SecondChannel_TD_D ata"
"AcousticCompensation_RX_12_SecondChannel_TD_D ata"
"AcousticCompensation_RX_16_SecondChannel_TD_D ata"
"AcousticCompensation_RX_22_05_SecondChannel_TD_Da ta"
"AcousticCompensation_RX_24_SecondChannel_TD_D ata"
"AcousticCompensation_RX_32_SecondChannel_TD_D ata"
"AcousticCompensation_RX_11_025_TD_Data"
"AcousticCompensation_RX_12_TD_Data"
"AcousticCompensation_RX_22_05_TD_Data"
"AcousticCompensation_RX_24_TD_Data"
"AcousticCompensation_RX_32_TD_Data"
"DRC_RX_Data"
"DRC_TX_8kHz_Data"
"DRC_RX_8kHz_Data"
"DRC_TX_16kHz"
"DRC_TX_16kHz_Data"
"EnhancedEchoCancellerData"
"NoiseReductionData"
"SWAP_TX1_TX2"
"CCO_OUTV"
"SWAP_RX1_RX2"
"TX2_HPEN"
"TX1_HPEN"
"HIFI_ALOOP"
"TXPGA2"
"TXPGA1"
"RXPGA2"
"RXPGA1"
"RXVOL2"
"RXVOL1"
"TXGC"
"MIC1_TXGAIN"
"AUXI1_TXGAIN"
"TX1MUX_SEL"
"TX2MUX_SEL"
"AUXI3_TXGAIN"
"AUXI2_TXGAIN"
"STPGA1"
"STPGA2"
"ST_ON"
"PCMJITTER"
"PCM_LSBVALID"
"PCMO_TRISTATE"
"PCM_SWAP"
"PCM_LOOP"
"PCMDELAY"
"AUXO1_RXSEL"
"AUXO2_RXSEL"
"AUXO1_INSEL"
"AUXO2_INSEL"
"BEARP_RXSEL"
"BEARN_RXSEL"
"BEARP_INSEL"
"BEARN_INSEL"
"LINEP_RXSEL"
"LINEN_RXSEL"
"LINEP_INSEL"
"LINEN_INSEL"
"MUX1_ADD"
"RX1_ADD"
"MUX1_INSEL"
"MUX2_ADD"
"RX2_ADD"
"MUX2_INSEL"
"LINEP_GAIN"
"LINEN_GAIN"
"BEARP_GAIN"
"BEARN_GAIN"
"AUXO2_GAIN"
"AUXO1_GAIN"
"POWER_ON"
"SBC_ON"
"STEREO_OUTPUT_ON"
"CTC_Enable"
"CTC_Delay"
"CTC_Level"
For the N00bs start modding with only TXPGA2, TXPGA1 ; RXPGA2, RXPGA1 ; RXVOL2, RXVOL1.
& for the APF Modder's u know what to do.
When you are done then close the template & save the acoustics.
Finally open APF suite.Click "Compress" select those files which you just edited & click open.it will automatically convert it back to zapf & ur done.





Now put them to your phone to test your acoustics.