w850i question! please look!

[senter]

i been playing about trying flash my phone and iv done the bit ware you plug it in and hold the c button !

But now it get a red flashing light at the power botton and i cant do the hold c button thing so i cant get it to work with the program??


any ides whats up?

Must use Setool.

1. Reinsert battery and do NOT turn on phone!
2. Start Setool and click Identify
3. Hold 2 and 5 together and in the meantime put the USB cable.
When hear that sound (though that connects USB flash memory) disconnect USB cable, reinsert battery and do NOT turn on phone!
4. Start XS++ v3.1 and click Connect.
5. Hold "C" button in the meantime put the USB cable.
6. Flash only Main ( W850_R1KG001_MAIN_GENERIC_CY_RED52), then again disconnect USB cable, reinsert battery and now can turn on phone - work fine as before.

[Gary_w850i]

Must use Setool.

1. Reinsert battery and do NOT turn on phone!
2. Start Setool and click Identify
3. Hold 2 and 5 together and in the meantime put the USB cable.
When hear that sound (though that connects USB flash memory) disconnect USB cable, reinsert battery and do NOT turn on phone!
4. Start XS++ v3.1 and click Connect.
5. Hold "C" button in the meantime put the USB cable.
6. Flash only Main ( W850_R1KG001_MAIN_GENERIC_CY_RED52), then again disconnect USB cable, reinsert battery and now can turn on phone - work fine as before.

Hi i just tryed this and got

12:07:42| Did not receive 0x5a. Continuing

but it dont seem to continuing?

[senter]

Hi i just tryed this and got

12:07:42| Did not receive 0x5a. Continuing

but it dont seem to continuing?

Reinsert battery.