Debranding K810 problems

[asalhan]

hi guys i tried to debrand a K810 (currently has nasty T-Mobile interface)

So i downloaded 2 files, after looking through some other posts

a) K810_R8BA024_FS_S_E_EUROPE_RED52.fbn
b) K810_R8BA024_MAIN_GENERIC_SM_RED52.mbn

I used XS++ to flash Main Firmware and File System. According to XS++ the whole operation was successful so i disconnected the phone and inserted a SIM card in it. It powered on which was good news but when i got to the PIN screen no stars were appearing as i was typing a valid PIN code in and when i typed it in and pressed ok, i got an error message saying

"Configuration error. Please contact your network operator or service centre.

Have i done something wrong here or am i missing something out...below is a log of the phone AFTER it has been flashed with the above mentioned flashes

16:05:34| Attempting to open the interface...
16:05:34|
16:05:35| TURN OFF PHONE!
16:05:35| Hold 'C' button on phone and connect phone NOW.
16:05:35| You have 30 seconds...
16:05:35|
16:05:38| Baseband ID: 9900
16:05:38| Protocol Version: 3.1
16:05:38| Phone name detected!
16:05:38|
16:05:38| Profiling SEMC phone...
16:05:38| Platform: DB2020
16:05:38| OTP CID: 51
16:05:38| EROM CID: 52
16:05:38| EROM Color: Red
16:05:38| IMEI: 35612701xxxxxx
16:05:38| Phone ID: K810
16:05:38| Region: T_MOB_INT_A
16:05:38| CDA: CDA102779/51 R6A
16:05:38| Firmware Version: R1KG001
16:05:38| EROM: R3A022
16:05:38| Ready for operation!

what can i do to correct what has happened? Thanks in advance

[jasmin]

You must finalize your phone ( apply custom file ).

Look at example:

Finalization = Completing flashing operations and storing basic settings that phone needs to properly operate [i.e. security certificates, (and this is why phone displays "configuration error" if it is not properly done)].

Firmware has two parts:
1. FS: It contains languages, images, sounds, animations, settings, etc. Anything that isn't pure software.
2. Main: It contains the software.

Note: MAIN and FS HAVE to be the same software version
MAIN R1BC002
FS R1BC002
Customization has to be same region as FS, in this case
FS = EU5 (EUROPE_5)
Customization =CDA102338/50 ( EUROPE_5 Sunrise Switzerland)

Nice day

[gift01]

Unfortunately I got the same problem. I am completely new to this, tried flashing my phone today from firmware version R8BE001 CID 52 to firmware version R8BA024 CID 52.
XS++ said operation was completed successfully but when I inserted a simcard I got the same error as above. "Configuration error. Please contact your network operator or service centre."

[SeaMonkey]

Just like @jasmin said after flashing you need to finalize your phone with CUSTPACK ,just go to download area ,find custompacks ,your phone model and custpack.

[asalhan]

i'm being an uber noob now, will this work?

K810i_CDA102779_33_R4A_Customized_United_Kingdom

[SeaMonkey]

i'm being an uber noob now, will this work?

K810i_CDA102779_33_R4A_Customized_United_Kingdom

With FS you have use this custpack Top Sony Forums
but what language you need

[asalhan]

i need UK english, i can see that i apply the FS and main firmware through XS++, do i also apply the custom pack through there too? if yes, where do i put the "tpa" folder and how do i get the program to look for it?

[senter]

i need UK english, i can see that i apply the FS and main firmware through XS++, do i also apply the custom pack through there too? if yes, where do i put the "tpa" folder and how do i get the program to look for it?

Use these flash files:

1. K810_R8BA024_FS_EUROPE_5_RED52
2. HB1-06_Gen_CDA102568_14_R6A_GENERIC_EUROPE_5
3. K810_R8BA024_MAIN_GENERIC_SM_RED52

On step 2 make this:

Click Extract Here on HB1-06_Gen_CDA102568_14_R6A_GENERIC_EUROPE_5

Then move folder TPA in folder own_custpack ( if you haven't create New Folder with this name ).

Then must move XS++ and folder own_custpack in New Folder and make this:

[asalhan]

Great! thanks alot for the help, worked first time.