Dead k800

[huggim2]

Thanks again for your response. I have tried the patch as per instructions from your link, using a patch generated by the firmare currently on the phone(K800_R8BA024_MAIN_GENERIC_WI_RED52.mbn). This seems to go on correctly apart from one popup saying 'some patch values differs, continue ?' I continued at this point. After it has completed and I run the identify it shows errors and the phone will no longer switch on. Any thoughts as to why this should error ?

SE log below....

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35170************ CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:2019
Flash props sent ok

CID52 BYPASS PROCEDURE STARTED
Processing part1...
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
Processing part2...
Processing part3....
OTP LOCKED:1 CID:49 PAF:1 IMEI:35170************ CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:2019
Flash props sent ok

REMOVE CABLE FROM PHONE
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

HOLD "C" BUTTON AND ATTACH PHONE

CID52 BYPASS PROCEDURE FINISHED

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDR:DB2020_PRELOADER_FOR_SETOOL2
LDR:DB2020 LOADER FOR SETOOL2
Flash ID check:2019
Flash props sent ok
Going to execute VKP script....
Starting to process VKP patch script: C:\temp\Remove_SIM_lock_K800_R8BA024.vkp
VKP script loaded OK. Lines: 6
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44740000
Blocks selected OK. Reading blocks: 1
Blocks readed to memory OK. Checking contents...
Blocks patched OK. Start writing...
Block 0 written
VKP script executed OK
Elapsed:566 secs.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Flash ID check:2019
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:35170***********3 CERT:RED
FLASH CID:52 COLOR:RED
set_gdfs_props failed, exiting

[huggim2]

Has anyone got thoughts on why this K800i should produce the 'some patch values differs, continue ?' error, when applying the remove lock patch with setool2, as mentioned in the previous text.

Cheers Mike.

[kursaros]

You might be using a patch of another version...I suggest you flash to K810 R8BA024,and then unlock...

[huggim2]

Nope, used 'K800_R8BA024_MAIN_GENERIC_WI_RED52.mbn' to flash and the remove sim lock script created from that firmware mbn and still get :

Going to execute VKP script....
Starting to process VKP patch script: C:\temp\Remove_SIM_lock_K800_R8BA024.vkp
VKP script loaded OK. Lines: 6
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44740000
Blocks selected OK. Reading blocks: 1
Blocks readed to memory OK. Checking contents...
Blocks patched OK. Start writing...
Block 0 written
VKP script executed OK

If I then go back to xs++ and flash R8BA024 to the phone, it works again but still locked to '3'...........

[kursaros]

Nope, used 'K800_R8BA024_MAIN_GENERIC_WI_RED52.mbn' to flash and the remove sim lock script created from that firmware mbn and still get :

Going to execute VKP script....
Starting to process VKP patch script: C:\temp\Remove_SIM_lock_K800_R8BA024.vkp
VKP script loaded OK. Lines: 6
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44740000
Blocks selected OK. Reading blocks: 1
Blocks readed to memory OK. Checking contents...
Blocks patched OK. Start writing...
Block 0 written
VKP script executed OK

If I then go back to xs++ and flash R8BA024 to the phone, it works again but still locked to '3'...........

But you MUST NOT flash the phone after patching!!!That's why it is locked then...