My W580 is DEAD, please HELP ME!

[coolcris]

I tried to repared the EROM using GFlash but it got stuck like this:

[coolcris]

I also tried to flash using Far, this is what i got:

[simox]

The GFlash and FAR+SEFP are suitable only for DB2010 CID36 phones, but your phone is a DB2020 CID52. First try to repair the EROM with SETool2 Lite. Just follow the guide...

[coolcris]

Either GFlahs and Far don't recognize my phone. Please try to guide me through using Setool because i don't feel i could do it right if i do it exactly like the tutorial says.

[coolcris]

I tried with setoollitght but it doesn't work when i press the repair botton

[simox]

What doesn't works exactly? Please be more specific.
When you connect the phone, press the 2+5 buttons istead of C...

[coolcris]

I just tried to repaired it but it was not possible, this was the message:

ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:xxxxxxxxxxxxxx CERT:N/A
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
loader startup: executed
CSloader refused to start GDFS services,error is:29
failed, that is fatal
Elapsed:12 secs.

[coolcris]

I even tried a full flash but this was the result:
ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:xxxxxxxxxxxxxxxxxx CERT:N/A
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok

CID52 BYPASS PROCEDURE STARTED
Processing part1...
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
Processing part2...
Processing part3....
BOOTROM MODE DETECTED
OTP LOCKED:1 CID:51 PAF:1 IMEI:xxxxxxxxxxxxxxx CERT:N/A
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok

REMOVE CABLE FROM PHONE
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

HOLD "C" BUTTON AND ATTACH PHONE

CID52 BYPASS PROCEDURE FINISHED

ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
Trying to launch embedded bootloader...
embedded flashloader not responds !
Elapsed:464 secs.

What can i do now?

[EzZn0]

Phone's Dead and Redlight blinking | Sony Ericsson Flashing

[coolcris]

Setool2lite doesn't recognize bootmode so it can't repair my EROM. I'm sad i think i'm gonna throw it away(dis fu$#$ phone!!!!)