W800 Layout.xml

[SeaMonkey]

Now I want time and date on the top of the right side
on my T650i
How to do this?I only get date there,or only time,but not both

Hello again! Here you have layout and I hope this is it.

[schmarakel]

Many thanks,it works!
How do you know with which number you should replace
the originals?

Original:

<attr value="121"/> <attr value="236"/> <attr value="210"/> <attr value="234"/> <attr value="5"/> <!-- Time -->
<attr value="121"/> <attr value="236"/> <attr value="238"/> <attr value="262"/> <attr value="5"/> <!-- Date -->

I replaced in time 210 to 5 and 234 to 32,then time will be on the top
at the right side,but I don`t get date under time?

[SeaMonkey]

Many thanks,it works!
How do you know with which number you should replace
the originals?

Original:


I replaced in time 210 to 5 and 234 to 32,then time will be on the top
at the right side,but I don`t get date under time?

The values in layout are x1 , x2 , y1 , y2 and on mobile screen that values look like this in att. ,and "TIME" ,"DATE" etc. dependes on x2 or y2 (depend on font size,date,time format). And just change values and try

[schmarakel]

Do you know for what x1,x2,y1,y2 is and must I change all 4 values or only
y1 and y2 to change the position of date and time?

[SeaMonkey]

Do you know for what x1,x2,y1,y2 is and must I change all 4 values or only
y1 and y2 to change the position of date and time?

x1 - is left side (0 - Full left)
x2 - is lenght of time or date ,etc ( so you just put cca 60 ,or try any similar
value)
y1 - is up side ( 0 - full up)
y2 - is little more than your font size ( so if your font is 16B you just put here 18
or 20 or 24 -thats your case

So if you change your first value to 5 , next you change to 29, and just leave 4 ( for space ) and next value is 33,and again for font size 57 and thats all