Hi,
I use XS++ instead. I am getting errors when flashing the phone, what should I do?

17:12:45| You have 30 seconds...
17:12:45|
17:12:51| Baseband ID: 9900
17:12:51| Protocol Version: 3.1
17:12:51| Phone name detected!
17:12:51|
17:12:51| Profiling SEMC phone...
17:12:51| Platform: DB2020
17:12:51| OTP CID: 51
17:12:51| EROM CID: 52
17:12:51| EROM Color: Red
17:12:51| IMEI: 35464901xxxxxx
17:12:51| Phone ID: W880
17:12:51| Region: EUROPE_4
17:12:51| CDA: CDA102568/13 R5A
17:12:51| Firmware Version: R1JC002
17:12:51| EROM: R3A016
17:12:51| Ready for operation!
17:13:50|
17:13:50| Sending db2020_cid01_prodid_p3j.bin...
17:13:50| Applet ID: 070129 0950 NGUCXC1250330_DB2020_PRODUCTIONIDLOADER_P3J
17:13:51| This is a PRODUCTION_ID loader
17:13:51|
17:13:51| Sending db2020_mem_patcher_cid52_r2a006.bin...
17:13:51| Applet ID: 061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
17:13:51| This is a MEM_PATCHER loader
17:13:51|
17:13:51| Sending db2020_cid52red_flash_r2a005.bin...
17:13:51| Applet ID: 061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
17:13:51| This is a FLASH loader
17:13:51| Now flashing firmware main...
17:13:51| Flashing c:\users\paradize_z\downloads\unlock phones\w880\firmwares\rjc002\w880_r1jc002_main_gen eric_red51.mbn
17:13:51| Header type: BABE
17:13:52| 460 flashblocks
17:13:52| Binary acknowledge failed with: 89
17:13:52| Failed
17:13:52| Binary acknowledge failed with: 68
17:13:52| Command: Error 0x68
17:13:52| Failed sending flashblock 1. Returnvalue 0xD0022D00
17:13:52| Finishing flash
17:13:52| Binary acknowledge failed with: 02
17:13:52| Failed
17:13:52| Failed