Failed sending flashblock 98. Returnvalue 0x1 Error

[rudie]

This phone (W580i) died couple weeks ago because I flashed the gdfs from another phone unto this phone. The phone would not connect to anything at all until resently it start connecting to XS++. I was able to flashed back a backup of my original gdfs. After that the phone still did not turn on. I then try to do a full flash with Main, FS & Cda but I always get the error above. I can flash the Main without any error but the FS and Cda always give this error. It is possible to fix the error? Here is a log of my phone.

Thanks for any help.

18:35:57| Error: Flashing failed

18:35:57| Disconnected... Unplug the phone

18:36:05|

18:36:05| Attempting to open the interface...

18:36:05|

18:36:05| TURN OFF PHONE!

18:36:05| Hold 'C' button on phone and connect phone NOW.

18:36:05| You have 30 seconds...

18:36:05|

18:36:09| Sorry, your phone is NOT SUPPORTED

18:36:09| Sendinging shutdown signal to phone...

18:36:11| Shutting down...

18:36:12| XS++ v3.1 (Darwin) Ready !

18:36:12| Executed on Microsoft Windows XP

18:36:20|

18:36:20| Attempting to open the interface...

18:36:20|

18:36:20| TURN OFF PHONE!

18:36:20| Hold 'C' button on phone and connect phone NOW.

18:36:20| You have 30 seconds...

18:36:20|

18:36:24| Baseband ID: 9900

18:36:24| Protocol Version: 3.1

18:36:24| Warning: IMEI name does not match GDFS name (IMEI:NULL GDFS:W580)

18:36:24| ...using GDFS name

18:36:24|

18:36:24| Profiling SEMC phone...

18:36:24| Platform: DB2020

18:36:24| OTP CID: 51

18:36:24| EROM CID: 52

18:36:24| EROM Color: Red

18:36:24| IMEI: 01127100xxxxxx

18:36:24| Phone ID: W580

18:36:24| Region: CINGULAR

18:36:24| CDA: CDA102774/102 R17A

18:36:24| Firmware Version: R7AC001

18:36:24| EROM: R3A022

18:36:24| Ready for operation!

18:36:37| ~~~~~~~~~~ Custpack information ~~~~~~~~~~

18:36:37| Custpack: AMERICA_2 (CDA102460/101) (K510)

18:36:37| Generic(non-branded) custpack: Yes

18:36:37| Allowed languages: en, pb, xl,

18:36:37| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

18:36:40|

18:36:40| Sending db2020_cid01_prodid_p3j.bin...

18:36:40| Applet ID: 070129 0950 NGUCXC1250330_DB2020_PRODUCTIONIDLOADER_P3J

18:36:40| This is a PRODUCTION_ID loader

18:36:40|

18:36:40| Sending db2020_mem_patcher_cid52_r2a006.bin...

18:36:41| Applet ID: 061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0

18:36:41| This is a MEM_PATCHER loader

18:36:41|

18:36:41| Sending db2020_cid52red_flash_r2a005.bin...

18:36:41| Applet ID: 061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005

18:36:41| This is a FLASH loader

18:36:41| Now flashing firmware main...

18:36:41| Flashing c:\documents and settings\xxxx\desktop\w580 unlocking & flashing - works\xs++\w580_r8be001_main_nam_1_la_red52.mbn

18:36:41| Header type: BABE

18:36:41| 460 flashblocks

18:40:39| Finishing flash

18:40:39| Done flashing

18:40:39| Now flashing filesystem...

18:40:39| Flashing c:\documents and settings\xxx\desktop\w580 unlocking & flashing - works\xs++\w580_r8be001_fs_america_1_red52.fbn

18:40:39| Header type: BABE

18:40:39| 209 flashblocks

18:41:36| Failed sending flashblock 98. Returnvalue 0x1

18:41:36| Finishing flash

[musicdj25]

i have the same problem too

[musicdj25]

try to bring you phone to SE Service Point

[senter]

This phone (W580i) died couple weeks ago because I flashed the gdfs from another phone unto this phone. The phone would not connect to anything at all until resently it start connecting to XS++. I was able to flashed back a backup of my original gdfs. After that the phone still did not turn on. I then try to do a full flash with Main, FS & Cda but I always get the error above. I can flash the Main without any error but the FS and Cda always give this error. It is possible to fix the error? Here is a log of my phone.
.............

You use wrong Main !!!

First flash File System, then customize with HB1-06_Gen_CDA102568_106_R8A_GENERIC_AMERICA_1 and finaly flash Main with W580_R8BE001_FS_AMERICA_1_RED52

[rudie]

Thanks for all replies but I don't think the main is wrong. I have flashed my other W580 with the same Main, FS and Cda and they all worked fine. I also was able to flash this same main on this phone without any problem. The problem I am having is when I try to flash the File System or the Cda I get the error. I hope there is a way to fix this becuase I taught this phone was completely dead and have even went and bought a new phone.