How to use phone sx or xs++

[connah]

1. Download the firmware (Main, FS and Custom pack)

2. Open xs++ and connect your phone same way as above.

3. Click Flash or Flasing in bottom right

4. Open your main by clicking on the "..."

5. Tick the tick box for applying Main ONLY!

6. Click start flash

7. When completed unplug your phone and take out and replace the battery but do NOT switch it on yet

8. Reconnect same way.

9. Now untick the MAIN and find your FS (filesystem)

10. tick the box for file system ONLY!

11. Click start flash

12. When completed again unplug your phone but dont turn it on tke out and replace the battery and reconnect.

13. Untick the FS box and tick the finalise box

14. where t says CDAnnnnnnn\nn (or similiar) find your cda CDA list Here...

15. Choose any additional options from bottom half that you want and click start flash AGAIN

15. When completed remove your phone and battery for 5 seconds.

16. re-insert battery and turn on.

17. Firmware should be update to check press R*LL*L* and goto software info>firmware (or something like that).

Any help or questions or mistakes post here