Dead w810i. help needed

[gsm420]

i am trying to flash w810i with blinking white screen but getting error.
please help. thanx in advance. here is the log :
v0.914027/UNI
CARD SERIAL: 00042586
Loaded 51 flash descriptors
Open COM port OK
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:115200
OTP LOCKED:1 CID:49 PAF:1 IMEI:35233601551565 CERT:RED
PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738

REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

Open COM port OK
Trying to launch embedded bootloader...
INT LDR:COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:897E
Flash props sent ok
FOUND: R4EA031_CXC1250316_GENERIC_HN
Restore from:R4EA031_CXC1250316_GENERIC_HN
can't open file "E:\setool2g\rest\R4EA031_CXC1250316_GENERIC_H N"
writing H:\setool\Firmwares\w810i\R4EA031_1250316_GENERIC_ HN.ssw\R4EA031_1250316_GENERIC_HN.ssw.cry
CURRENT FLASH FILE CID:49
SSW uses dynamic hash, dynamic hash len is:344
Will flash 344 blocks...
Send superblock command NAK
Elapsed: 339 secs.

[senter]

Try with XS++ 3.1 !

1. Flash File System, then reinsert battery from phone and don't turn on!
2. Customize File System, then reinsert battery from phone and don't turn on!
3. Flash Main, then reinsert battery from phone and turn on -> you see Please wait...