Error in flashing frimware

[ODEN]

I get this error in left hand log

00:55:19| Binary acknowledge failed with: 89
00:55:19| Failed
00:55:20| Binary acknowledge failed with: 68
00:55:20| Command: Error 0x68
00:55:20| Failed sending flashblock 1. Returnvalue 0xD0022D00
00:55:20| Finishing flash
00:55:20| Binary acknowledge failed with: 02
00:55:20| Failed
00:55:20| Failed

my phone K800 and im tryng to upgrade to R1KG001

what should I do ??

[ama95]

Download your firmware again and try flashing again.

[jasmin]

Here are some tutorials:

XS++ 3.1 Guide-Flashing,Customizing,Recovering

or

Flash your phone and How to apply or remove patch using SETool 2 Lite

Nice day

[thienchanh]

Download your firmware again....good luck

[elias74]

U get that error log by flashing with XS++ or setool 2 or some other program? Maybe u can try to use a different program.

[shanu_577]

what is your phone cid if your phone cid52 than you can change firmware

[louise]

I get this error in left hand log

00:55:19| Binary acknowledge failed with: 89
00:55:19| Failed
00:55:20| Binary acknowledge failed with: 68
00:55:20| Command: Error 0x68
00:55:20| Failed sending flashblock 1. Returnvalue 0xD0022D00
00:55:20| Finishing flash
00:55:20| Binary acknowledge failed with: 02
00:55:20| Failed
00:55:20| Failed

my phone K800 and im tryng to upgrade to R1KG001

what should I do ??

it should be well known by now but theres always some, but whatever you try do not connect to seus or you will have shiney new cid 53, which offcourse you cant do nothing with atm. ;) you can do some stuff with jdflasher by den_po what i dont know. but you should check first
gd luck

[paladin]

I think in stead of R1KG001, R8BF003 is a better option.