Resetting K800 Total Call Timer

[diezil]

Note: You do this at your own risk!!! your GDSF is not something you should mess around with unless you know what your doing and take the relevant precautions!!!

We will be using SETool2 Lite which can be found here in the topsony download section

OK this is a little guide on "resetting" DB2020 Total Call Time that we see in our service menu >*<<*<* Service Tests/Total Call Time

Before:


Firstly we must make a backup of our GDSF area just in case things go bad, look at the image below and select your phone model in the highlighted drop down box and press "Read GDSF!!!" and follow the instructions given by SETool2 Lite, a file named after your phones IMEI# will be placed in the SETool2 Lite folder... (Keep this file VERY safe).



Now its time to reset our Call Timer back to "0", start up SETool2 Lite and select your phone type from the drop down box, now add the DB2020_reset_total_call_timer.txt file to the Misc Files section as shown in the preview, then press "Write SCRIPT!!!" and wait for SETool2 Lite to finish.



After:


Tested on K800@K810 CID52 (Should work will all DB2020 though)

[chawwa]

today I use your instruction to reset total call time on my K800i R8BF003 it worked very well.
Thank you for the guide. keep it up

[nabiladeeb]

tested on a w580i CID52, working perfect :)