Results 1 to 7 of 7
  1. #1
    Recently Initiate
    Join Date
    Apr 2008
    Device
    -
    Posts
    3
    Thanks
    0
    Thanked 2 Times in 1 Post

    Using XS++ to create an M950?

    As a few of you may recall, last year news of combining the firmwares of the M600i and W950i appeared. More specifically, the combination of certain parts of the firmware of the M600i and W950i and then flashed into the M600i using SEtool2 would create a business phone with qwerty-keyboard and excellent media player.

    See http://www.esato.com/archive/t.php/t-146927,1.html for instructions

    and

    YouTube - Convert M600i - W950i

    YouTube - Convert M600i - W950i version 2

    YouTube - Convert M600i - W950i II

    for videos of the "M950" phone.

    Now to the questions:

    1. Is the above flashing possible to achieve using XS++? Has anyone tried it?

    2. As you all know by now, SE stopped developing the firmware for the M600i, W950i and P990i when they were about to launch the P1i. However, for some reason the W950i received a firmware update beyond M600i. Also, the W950i is listed as being compatible with Fring while the M600i is not.

    Would a firmware combination of the latest firmwares for M600i and W950i, flashed into a M600i give the M600i the benefits of Fring-compatiblity and updated Opera browser?

  2. The Following 2 Users Say Thank You to jketzetera For This Useful Post:


  3. #2
    Advanced user ama95's Avatar
    Join Date
    Jan 2008
    Device
    K750i
    Posts
    372
    Thanks
    50
    Thanked 67 Times in 58 Posts

    Re: Using XS++ to create an M950?

    I think you can't use XS++ to do that.

  4. #3
    Member albo6's Avatar
    Join Date
    Dec 2006
    Device
    T650i
    Posts
    40
    Thanks
    4
    Thanked 3 Times in 3 Posts

    Re: Using XS++ to create an M950?

    I think is posiblle, because both models are CID49 and identical hardware. But first you must create a M950_firmware like the instruction in the link! XS++ can flash PDA, just mark "Flash all files" and then Flash!!!
    Last edited by albo6; 04-18-2008 at 09:34 AM.

  5. #4
    Recently Initiate
    Join Date
    Apr 2008
    Device
    -
    Posts
    3
    Thanks
    0
    Thanked 2 Times in 1 Post

    Re: Using XS++ to create an M950?

    Quote Originally Posted by albo6 View Post
    I think is posiblle, because both models are CID49 and identical hardware. But first you must create a M950_firmware like the instruction in the link! XS++ can flash PDA, just mark "Flash all files" and then Flash!!!
    That is good news. I actually have two M600i phones so I am willing to take the risk and try to flash a custom M950 firmware onto one of them. Unfortunately, I have yet to gain access to the firmware archive so I guess this particular project of mine will have to wait for approx 2 months.
    Last edited by jketzetera; 04-21-2008 at 11:49 AM. Reason: added missing w

  6. #5
    Recently Initiate
    Join Date
    Apr 2008
    Device
    P990i
    Posts
    3
    Thanks
    0
    Thanked 1 Time in 1 Post

    Re: Using XS++ to create an M950?

    now i need to change my W950 UI

  7. #6
    Recently Initiate
    Join Date
    Apr 2008
    Device
    -
    Posts
    1
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Re: Using XS++ to create an M950?

    Hi, I'm also interested in having fring or some other SIP client on my M600.

    This is what i found on esato forum
    Convert M600 to W950! : Symbian phones : Sony Ericsson @ Esato


    hi all here is the link to M950....M600i with walkman firmware that everyone is after....i found it on a website....enjoy and let me know if you have any luck......

    RapidShare: 1-Click Webhosting
    But are you sure that W950 is supported by fring, as far as I know both m600 and W950 are not supported due to limitations. The limitations being that for some reason the device can not record and play sound (full duplex) at the same time

  8. #7
    Recently Initiate
    Join Date
    Apr 2008
    Device
    -
    Posts
    3
    Thanks
    0
    Thanked 2 Times in 1 Post

    Re: Using XS++ to create an M950?

    Quote Originally Posted by wideblue View Post

    But are you sure that W950 is supported by fring, as far as I know both m600 and W950 are not supported due to limitations. The limitations being that for some reason the device can not record and play sound (full duplex) at the same time
    The w950 received one or two firmware updates more than the m600. According to SE-World

    Firmware Changelogs für Sony Ericsson W950i - SE-World

    The w950 (but not the m600) achieved fring-compatibility with the second latest firmware. If that information is correct, either the w950 has better duplex capabilities than the m600 or Sony Ericssons decided not to bring the same functionality to the m600 as to the w950. Remember that the w950 also received a newer version of Opera than the m600.

    So the point is to try to make a m950 firmware using the latest or second latest firmware for the w950.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •