dead S500

[whatsucka]

Anyone help??

[whatsucka]

-i try to flash the MAIN n FS using setool2 with crusier cable

Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:3590850121xxxx CERT:N/A
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
writing C:\Backup\S500 Backup\FS\S500_R8BA024_FS_CENT_EUROPE_RED52.fbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:3620
Will flash 181 blocks...
SSW loading returns:0
writing C:\Backup\S500 Backup\MAIN\S500_R8BA024_MAIN_GENERIC_LY_RED52.mbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:9200
Will flash 460 blocks...
SSW loading returns:0
Elapsed:897 secs.

-then i try to unlock/repair after flashing it give me dis error

Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:3590850121xxxx CERT:N/A
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
loader startup: executed
CSloader refused to start GDFS services,error is:29
failed, that is fatal
Elapsed:11 secs.

it still blinking red light after flashing, can anyone help me out??

[shanu_577]

please download main generic(mbn) & file system(fbn) from .:Top SE:. and flash with xs++3.1 i hope your phone will be on

[shanu_577]

dont use cruiser cable........ please use dcu60 cable and flash with xs++3.1 your phone will be power up

[whatsucka]

xs++ is unable to read the dead s500... and only crusier cable is able to make the comp to read it... n xs++ is unable to let me pick the com

[whatsucka]

o wow i somehow fixed da fone!!

the red blinking light is gone!! now when i turn on the fone it vibrates then keypad n side lights turn on, but the screen is all black

[infin1ty13]

now proper flash main and fs good luck and good night *gasp*

[whatsucka]

nope...flash main n fs still comes out a black screen...

[whatsucka]

can dis b a software problem or hardware??

[ama95]

Try to flash it to W580.