dead S500

[albo6]

wat is KulanKendi?? i cant do it for her rite away because i dont have any program to flash for her...

Check this threat:
http://www.topsony.com/forum/showthread.php?t=6462

[whatsucka]

icic where can i find da EROM?? cuz i search everywhere i cant find it for free

[albo6]

icic where can i find da EROM?? cuz i search everywhere i cant find it for free

Look man just make this (you must not download EROM):
1. Download KulanKendi Client from thier site and start at.
2. Remove batery and reinserted back.
3. MArk "EROM Update" and push "Flash Phone"
4. Hold 2 and 5 button and insert the USB.
The all precudure is continued about 4-5 seconds, then try to start the phone. If the phone can't start just tace at ang go to service!!!

[ronald9712]

You can try to use Cruiser to flash SW & FS file to S500,and than use xs++ to customize it,because Cruiser year 06 customize is not free,we always used xs++ to customize phone.

[whatsucka]

the thing is XS++ wont read the fone

[EzZn0]

Phone's Dead and Redlight blinking | Sony Ericsson Flashing

[whatsucka]

oic, using that matter wat cable i need to use to connect to setool2?? regular DCU-60 is ok??

[ama95]

Try with DCU-60 and post a result.

[whatsucka]

nope i tried it with USB cable

ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35908501219617 CERT:N/A
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
loader startup: executed
loader filesystem startup: executed
CSloader refused to start GDFS services,error is:29
loader GDFS startup failed, that is fatal
Elapsed:20 secs.

[whatsucka]

battery is full charge but is still same problem

-when i do unlock/repair in setool2

llbug: port 13 open error: "The handle is invalid"
phone pre-boot failed,possible RECOVERY needed.
Elapsed:0 secs.
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:3590850121xxxx CERT:N/A
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
loader startup: executed
CSloader refused to start GDFS services,error is:29
failed, that is fatal
Elapsed:53 secs.

-when i do FLASH in setool2 with a S500 EROM i dl from topsony

Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:3590850121xxxx CERT:N/A
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
writing C:Documents and SettingsS500 BackupEROMS500_RED_CID52_R3B024_EROM-FOTA_2007-03-12_11.bin
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:80
Will flash 4 blocks...
SSW loading returns:0
Elapsed:53 secs.

-when i do RECOVERY in setool2

RECOVERY MODE STARTED
Open COM port OK
skipping empty loader...
All possible recovery loaders fail. That phone not supported
Elapsed:3 secs.

-when i do Identify in setool2

Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI:3590850121xxxx CERT:N/A
FLASH CID:52 COLOR:RED
no ack during gdfs_readvar !
Can't read SCRC unit
Elapsed:103 secs.

all done by using a crusier cable

anyone help??