Camdriver Sergiogber 14.7 with adjustable focus, and color effects.
Based on the original drivers of phones, without adding code of other phones or cameras that usually are unnecessary or that compromise the operation of the camera.
Features of Version 14.7:
It implements night mode filtering in all modes.
exposure time is increased in all modes achieving photos with greater sensitivity in low lighting and less noise.
Color saturation is improved by using any of the types of lighting (scenes). When selecting the type of lighting "Automatic" images with greater sharpness of colours and lower noise are obtained but can present saturation in images with focused light spot.
Gamma curve is corrected to fit the new features, depending on the type of lighting, obtaining realistic pictures with natural colors and minimal saturation.
Video: 14 Fps in normal mode and 10 Fps in night mode, obtaining the best balance between speed and stability.
"effects Mode" was changed to the "adjust mode" menu
Off -> "Brightness"
White and black -> "type lighting (scene)"
Negative -> Effects
Sepia -> "Focus (sherpness)"
Solarise -> "Color"
nce you select the adjust mode, you can change the value using the "+" and "-" volume key
To restore all settings to default, close and reopen the camera.
To use put the zip in misc in Setool and give a flash
New mode settings:
the new adjust mode menu allows you to configure Brightness, type lighting, effects, focus and color adjustment.
Brightness: Allows give more or less brightness to the images.
Type of lighting (scene) allows you to select the best color fit according to the tone of the kind of light environment, it may be Auto (adjusts colors in automatic way to keep the white as such), Sunlight (for photos outdoors in days whith much sun), incandescent light (for pictures taken under the yellowish light of the incandescent lamps, Fluorescent light (for photos taken under fluorescent light (yellow type), as the white type requires no adjustment), and Cloudy. The configuration settings for lighting are the originals, but can be adjusted by changing some settings driver that are very easy to edit and I can advise you if necessary to accommodate the settings that you require. For light whit hight color effect it is recommended to wait a few seconds before taking the first picture to make it possible to adjust the camera.
Effects: You can switch between off, black and white, negative, sepia and solarizar.
Focus (sharpness): allows you to select between 0 and 200% (100% defaut). With greater focus will enhance the contours of objets , less focus reduces noise.
Color Selection: allows you to select between 0 and 150% of the color image (0% for B & W and 150% full color, default)
I recommend you try and tell me your comments so and I can improve it.
For sites with low illumination I recommend using the night mode.
Compare the results with earlier versions or driver and the original one!
IMPORTANT: upload to the phone only the zip file. The rar is not for upload to the telephone, contains all the driver sergiogber and additional information such as table with all configurations of the driver. To install the driver extract the rar into a folder and look for the camdriver.zip who is inside.
![]()