Does adding patches to a z610 requiree a quick access patch? "please help :)"

[real_com]

Hello,

I have a z610 and using Simox' SIMLockPatchGen I have created a unlock patch, although I am unsure if I can simply apply this patch with setoollite2 or if I need to apply the quick access patch first :confused:

If I do indeed need to add the quick access patch first could someone please advise me on if this is any different to adding any other patch and if so how to add it.

Thanks in advance to anyone who helps :D

[jasmin]

Read this:

B. How to apply the generated patches to DB2020 CID52 phones:

IMPORTANT: First you need backup the GDFS. If something goes wrong you can unbrick you phone with this backup. Here is how to do:
Open SETool2 Lite v1.11.
1. Select your phone model.
2. Click on Read GDFS button.
3. Follow the instructions given by SETool2 Lite.
4. You will get a gdfs_yourIMEI.bin file in SETool2 Lite folder. Put it to a safe place.

I. We will apply the quick access patch to phone. It is needed to be able to use the quick access method in future. Due to this great patch you can easily apply the further patches, just like to DB2010 CID 49 phones.
!!!YOU NEED TO DO THIS ONLY ONCE!!!

With SETool2 Lite v1.11.
1. Select your phone model.
2. In Windows Explorer drag the MAIN file (.mbn) onto SETool2 Lite v1.11 folder\qamaker\qamaker.exe. In the qamaker's folder you will get a quick_access_XXXX_XXXXXXX.vkp file.
3. Click on ... (three dots) button near MISC files box, and select the vkp file generated in step 2.
4. Tick Bypass DB2020 security checkbox.
5. Click on Add button and select the MAIN firmware file.
6. Press FLASH button.
7. Follow the instructions given by SETool2 Lite.
8. READ THIS CAREFULLY, it is a little tricky: When a dialog pop-up, click "Yes" to remove the patch. Click "No" to add the patch. In this case click on "No" button.

At one moment you will belive that nothing happens and the status windows is not changing! DO NOT remove the CABLE! Wait until "ELAPSED x SECONDS" appears in status window.

This process will take some time, about 10-15 minutes or more...

II. Now we need to generate an unlock patch.
Run SIMLockPatchGen.exe, select that MAIN firmware (used earlier) by clicking on ... (three dots) button, then press the Make patch button. In status window you will get the path to the generated vkp file(e.g. "D:\...\SIMLockPatchGen\vkp\Remove_SIM_lock_XX X_XX XXXXX.vkp" patch file created.) Close the SIMLockPatchGen.

III. We will apply the generated unlock patch to unlock the phone.
With SETool2 Lite v1.11:
1. Click on Clear button.
2. Select your phone model.
3. Tick Use "quick access" patch checkbox
4. Uncheck(remove the tick from) Bypass DB2020 security checkbox.
5. Click on ... (three dots) button near MISC files box, and select the vkp file generated by SIMLockPatchGen.
6. Click Write SCRIPT button
7. Follow the instructions in left status window...
8. READ THIS CAREFULLY, it is a little tricky: When a dialog pop-up, click "Yes" to remove the patch. Click "No" to add the patch. In this case click on "No" button.

Wait until "ELAPSED x SECONDS" appears in status window, and done. Your phone is unlocked.

Nice day

[real_com]

That all makes sense to me, although in the SETool2 Lite v1.11 folder there is no qamaker folder so I can not produce the qa patch :confused:

No worries, found qamaker in the jdflasher download :)

[nissenisse]

That all makes sense to me, although in the SETool2 Lite v1.11 folder there is no qamaker folder so I can not produce the qa patch :confused:

No worries, found qamaker in the jdflasher download :)

if you are only going to unlock it you will not need quick access patch.

[real_com]

Ok, thanks for your reply. Does this mean that I simply add the SIM unlock patch straight to the phone from SETool lite 2?

[nissenisse]

Ok, thanks for your reply. Does this mean that I simply add the SIM unlock patch straight to the phone from SETool lite 2?

yes select model tick bypass db2020 security add main in files and add unlock patch in misc press flash