Kriomag CamDrivers...

[Kriomag]

Hello!

Kriomag v21.0 (donors: 4.5, 8.53, 8.54, 7.7 Final)

- ENM/LedENM
- 3 VR Modes - fixed! (NormalMode=15fps, NightMode=10fps, EnhanceNightMode=5fps)
- Smooth preview on Viefinder
- AE Lock
- SPOT Support (Picture Quality: Normal Mode = SPOT ON, FINE Mode = SPOT OFF)
- Manual Focus (1.0 Autofocus, 1.1 Focus to Infinity, Manual Focus Range 1.2-4.0)
- Super Manual Focus (Manual Focus + Macro: once half-press Shutter for Zoom x8 Preview ON/OFF)
- JPEG 89% (for Normal & Fine Picture Quality)
- Advanced Zoom (x4 for Photos & NightMode VR, x16 Smooth Linear for NormalMode VR, NO Zoom for ENM VR)


http://s23.quicksharing.com/v/938918...iver0.zip.html


Instructions for Super Manual Focus:
When in range 1.1-4.0 once half-press shutter for zoom preview - now you can change focus (+/-) with fine tuning half-press shutter again to preview all picture, press shutter for shot. enjoy! :)

[PSS]

Hello!

Kriomag v21.0 (donors: 4.5, 8.53, 8.54, 7.7 Final)

- ENM/LedENM
- 3 VR Modes - fixed! (NormalMode=15fps, NightMode=10fps, EnhanceNightMode=5fps)
- Smooth preview on Viefinder
- AE Lock
- SPOT Support (Picture Quality: Normal Mode = SPOT ON, FINE Mode = SPOT OFF)
- Manual Focus (1.0 Autofocus, 1.1 Focus to Infinity, Manual Focus Range 1.2-4.0)
- Super Manual Focus (Manual Focus + Macro: once half-press Shutter for Zoom x8 Preview ON/OFF)
- JPEG 89% (for Normal & Fine Picture Quality)
- Advanced Zoom (x4 for Photos & NightMode VR, x16 Smooth Linear for NormalMode VR, NO Zoom for ENM VR)


http://s23.quicksharing.com/v/938918...iver0.zip.html


Instructions for Super Manual Focus:
When in range 1.1-4.0 once half-press shutter for zoom preview - now you can change focus (+/-) with fine tuning half-press shutter again to preview all picture, press shutter for shot. enjoy! :)

Man your drivers come really hard to use not like on first site the 1.st driver :))

And you say the 8.53 is hard . Remember ?

I use the first driver and they are good is not necessary to do all the version.

PsychoSpooky !

[k2bi]

yay, zoom too :p
but yea, its gettin too complicated.

[Kriomag]

new version, see first page :)

[dioragry]

maybe something like the old supercam would be nice, when camera started its in normal mode, then press >*<<*<* to activate ure good camera driver.
and maybe speeding up picture taking in night mode would be good. btw, i would like to ask why does it become so slow? is it because of the ENM?

[colombia]

Hello!

Kriomag v21.2 (donors: 7.7 Final, 8.53, 8.54)

- Base Driver: 7.7 Final
- ENM/LedENM (NightMode + Macro / NightMode + Macro + LED)
- 3 VR Modes - fixed! (NormalMode=15fps, NightMode=10fps, EnhanceNightMode=5fps)
- Smooth preview on Viefinder
- AE Lock
- SPOT Support (Picture Quality: Normal Mode = SPOT ON, FINE Mode = SPOT OFF)
- JPEG 89% (for Normal & Fine Picture Quality)
- Advanced Zoom (x4 for Photos & NightMode VR, x16 Smooth Linear for NormalMode VR, NO Zoom for ENM VR)
- Manual Focus (Macro ON: 1.0 Autofocus, 1.1 Focus to Infinity, Manual Focus Range 1.2-4.0)
- Super Manual Focus (Macro ON: When in Range 1.1-4.0: once half-press Shutter for Zoom x10 Preview ON/OFF)


http://www.rogepost.com/n/6825291662


Kriomag v21.3 (donors: 7.7 Final, 8.53, 8.54, Pilya's CC)

- Base Driver: 7.7 Final
- ENM/LedENM (NightMode + Macro / NightMode + Macro + LED)
- 3 VR Modes - fixed! (NormalMode=15fps, NightMode=10fps, EnhanceNightMode=5fps)
- Smooth preview on Viefinder
- AE Lock
- SPOT Support (Picture Quality: Normal Mode = SPOT ON, FINE Mode = SPOT OFF)
- JPEG 89% (for Normal & Fine Picture Quality)
- Advanced Zoom (x4 for Photos & NightMode VR, x16 Smooth Linear for NormalMode VR, NO Zoom for ENM VR)
- Manual Focus (Macro ON: 1.0 Autofocus, 1.1 Focus to Infinity, Manual Focus Range 1.2-4.0)
- Super Manual Focus (Macro ON: When in Range 1.1-4.0: once half-press Shutter for Zoom x10 Preview ON/OFF)
- Color Correction - thx Pilya!


http://www.rogepost.com/n/0232595465


Sample Photos:

NightMode:


ENM = NightMode + Macro:


NightMode + LED:


LedENM (Nightmode + Macro + LED):




Without CC:


With CC:

escuse my english but not perfect yet jejej. my question is what is the C.C feature in the kriomag 21.3??

[k2bi]

@colombia
as it says:
- Color Correction - thx Pilya!

[colombia]

ok but i cant see that. this a feature or a fuction how activate it?

other question, i have a 7.7final, 8.53, 8.54, 9.90, and kriomag 21.3. what is the better camdriver ??

[k2bi]

as far as i know its always ON in 21.3. there isnt no CC in 21.2
(btw. i prefer version whitout CC)

[colombia]

ok the 21.2 camdriver is better??
men im cant understand y already install the 21.3 but i cant see a superirity. i think what the 9.90 is much better. what do you think??