Unlocking COMPLETED

First i tried debranding my S500i with a S500i firmware, then i proceeded to use this instruction: http://www.topsony.com/forum/showthread.php?t=6329
in order to unlock it. YES IT WENT SUCCESSFULLY BABY
But still phone doesn't work with other carrier...lame??

So i flashed it to W580i using this guide:
HowardForums: Your Mobile Phone Community Debranding with SETool 2 Lite

THEN i used the guide above: Remove SIM-lock patch generator using the w580i firmware in order to unlock it. Now i am not sure if this is ok (i wanted to try w580i) but the process went smoothly. Everything was done correctly. (Write Script worked in the end as well)

But phone is still locked (is there a way to check if phone is really locked/unlocked)
Any ideas on what might be the problem here?

Remove_SIM_lock_S500_R6BC002.vkp
Remove_SIM_lock_S500_R8BA024.vkp
S500_R8BE001_GENERIC_Remove_SIM_lock.rar

Quick Access Pack .vkp
http://www.4shared.com/file/33713135...0_R6BC002.html
http://www.4shared.com/file/33713146...0_R8BA024.html


http://aycu31.webshots.com/image/400...1396258_rs.jpg

http://aycu40.webshots.com/image/401...8065456_rs.jpg

http://aycu26.webshots.com/image/396...9225332_rs.jpg

http://aycu09.webshots.com/image/377...0735989_rs.jpg

http://aycu14.webshots.com/image/374...3509558_rs.jpg

http://aycu34.webshots.com/image/403...1447988_rs.jpg

http://aycu33.webshots.com/image/405...5557029_rs.jpg

how to do with video here
تطبيق باتش quick access

Just press:

>*<<*<* then go to "Service info" and then "Sim lock". Now just check if the "Network" lock is open or not.

OI startimes yes i have just done that

Quote:

---

Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit Index of ./ and buy FULL.

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35908501745457 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok

CID52 BYPASS PROCEDURE STARTED
Processing part1...
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
Processing part2...
Processing part3....
OTP LOCKED:1 CID:51 PAF:1 IMEI:35908501745457 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok

REMOVE CABLE FROM PHONE
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

HOLD "C" BUTTON AND ATTACH PHONE

CID52 BYPASS PROCEDURE FINISHED

ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDR:DB2020_PRELOADER_FOR_SETOOL2
LDR:DB2020 LOADER FOR SETOOL2
Flash ID check:897E
Flash props sent ok
writing C:\Documents and Settings\ANNJENN\Desktop\s500i\S500_R8BA024_MAIN_G ENERIC_LY_RED52.mbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:9200
Will flash 460 blocks...
SSW loading returns:0
Going to execute VKP script....
Starting to process VKP patch script: C:\Documents and Settings\ANNJENN\Desktop\SeTool 2 Lite 1.11\setool2lite_db2020\qamaker\quick_access_S500_ R8BA024.vkp
VKP script loaded OK. Lines: 1637
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44140000
New block #0001 added: $45B80000
Blocks selected OK. Reading blocks: 2
Blocks readed to memory OK. Checking contents...
Blocks patched OK. Start writing...
Block 0 written
Block 1 written
VKP script executed OK
Elapsed:981 secs.
Going to execute VKP script....
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDR:quick access patch by den_po
FLASH CID:52 COLOR:RED
OTP LOCKED:1 CID:51 PAF:1 IMEI:35908501745457 CERT:RED
LDR:DB2020 LOADER FOR SETOOL2
Starting to process VKP patch script: C:\Documents and Settings\ANNJENN\Desktop\SeTool 2 Lite 1.11\SIMLockPatchGen\vkp\Remove_SIM_lock_S500_R8BA 024.vkp
VKP script loaded OK. Lines: 6
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44600000
Blocks selected OK. Reading blocks: 1
Blocks readed to memory OK. Checking contents...
Blocks patched OK. Start writing...
Block 0 written
VKP script executed OK
Elapsed:25 secs.

---

As you can see above, it went smoothly

Quote:

---

Just press:

>*<<*<* then go to "Service info" and then "Sim lock". Now just check if the "Network" lock is open or not.

---

Is that when the phone is on with a working SIM card in it?

YESI WENT INTO SERVICE INFO--> SIM Lock
yeah it is locked to 5 network or some shit
damnit why won't this method work

Have you get "some values differs" error during patching?

No.............

Probably there is something wrong with the firmware. I suggest you to reflash completely(MAIN, FS, custom pack) your phone, then unlock it again. But first backup the user data from phone's memory(contact list, ring tones, pictures, etc.)

the ">*<<*<*" will only give u information bout ur fone...! won't be able to unlock it!

I've had "some values differs"... What does it mean?

Quote:

---

Originally Posted by smajo

I've had "some values differs"... What does it mean?

---

afaik it means that there is data in the part of your main where the patch wants to put some NEW data, this is ignored by most and me also, never caused any problems i am aware of.
gd luck

just keep looks through the forum, I'm sure somebody could help you
I had the exact problem, I did what I was supposed to do and it still didn't work.

if you did everything right, and by reflashing it, should be able to unlock it, I don't see why you can't.