Printable View
Hello guys,
I have a SE V800 flashed to Z800 with SeTool 2: now this phone is dead. I've tried everything to restore it, but, unfortunately, without success. Flashed many times, rewrited GDFS, EROM, tried Unlock/Repair and this damned phone still won't startup. Display lights for a fraction of second and before it does nothing, stays off. What could be happened? There is a chance to repair it?
Thanks in advance to all.
We need more information. Connect your phone to setool lite or xs++ and copy here your phones log.
Nice day
Try to give us the SETools Log. Copy and paste it here and perhaps we could help you
Thanks for reply, SeTool Lite 1.11 doesn't read phone info.
XS++ 3.1 says:
22:09:46| XS++ v3.1 (Darwin) Ready !
22:09:46| Executed on Microsoft Windows XP
22:10:01|
22:10:01| Attempting to open the interface...
22:10:02| Baseband ID: 7100
22:10:02| Protocol Version: 3.1
22:10:03| Speed set to 115200
22:10:03|
22:10:03| Sending db2000_cid00_prodid_r2b.bin...
22:10:07| Applet ID: 050810 0923 NPA1CXC125871_PRODUCTION_ID_LOADER R2B
22:10:07| This is a PRODUCTION_ID loader
22:10:07| Activating GDFS...
22:10:07| Cannot open GDFS
22:10:07| Activating GDFS...
22:10:07| Cannot open GDFS
22:10:07| Activating GDFS...
22:10:07| Cannot open GDFS
22:10:07| Activating GDFS...
22:10:07| Cannot open GDFS
22:10:07| Activating GDFS...
22:10:07| Cannot open GDFS
22:10:07| Warning: IMEI name does not match GDFS name (IMEI:V800 GDFS:n/a)
22:10:07| ...using IMEI name
22:10:07| Restarting phone - please wait...
22:10:19| Baseband ID: 7100
22:10:19| Protocol Version: 3.1
22:10:20| Speed set to 115200
22:10:20| Phone has restarted successfully...
22:10:20|
22:10:20| Profiling SEMC phone...
22:10:20| Platform: DB2000
22:10:20| OTP CID: 36
22:10:20| EROM CID: 36
22:10:20| EROM Color: Red
22:10:20| IMEI: 35488500xxxxxx
22:10:20| Phone ID: V800
22:10:20| Region: n/a
22:10:20| CDA: n/a n/a
22:10:20| Firmware Version: n/a
22:10:20| EROM: n/a
22:10:20| Ready for operation!
All operations went fine, without errors, so what is wrong? I have no idea.Quote:
Originally Posted by karlingen
Your GDFS is damaged.
If you made a GDFS backup before flashing , you can restore it and everything should be fine.
If you haven't got a backup, your phone is a brick.
Nice day
I've restored original GDFS too, without results.Quote:
Originally Posted by jasmin
Then you should tried flash with v800 firmware.
Nice day
V800 firmware isn't in the TopSony download area, where can I find it?
Finded, but file format is .cry and SeTool 2 doesn't flash it (BAD). What tool is needed?
There is no way to "rebuild" GDFS correctly? Could be a hardware fault?Quote:
Originally Posted by jasmin
If you can`t do it and you tried every thing possible, then you should take it to service center.
Nice day
Did you used SeTool2 (cracked by Ortica v0.91373)? NOT setool2 lite...right?Quote:
Originally Posted by ax89
The original firmware was CID 29 or CID 36? Is necessary update the CID with the patch before flash.
Yes, right.Quote:
Originally Posted by GinnCorvus
Original firmware was CID36, so I think that it's not necessary to update CID.Quote:
Originally Posted by GinnCorvus
So, i don't know... Try a full flash with SEMC v8.4.Quote:
Originally Posted by ax89
Flash failed. Here is SEMC-Tool v8.4 log:
Switch phone ON
Get phone info
Flash CID: 36
Phone KEY: A1_DB2000_36_RED
ERROR: 305010
Is possible to fix this damned GDFS with any solution without take the phone to a service point, because now it is no more under warranty?
try fash it with xs++ 1.5
Some (good?) news:
I have flashed the phone with TMS 2.45 client after tried to repair it using "Repair EROM" & "Recover Phone". In the end of process TMS has stopped in "Customize FS" and "Finalization": now phone doesn't start, but flash LED lights until I press the power on button. Is this a good signal from my V800?
Up...please help me.
No one can help me ?!?
Can I try using SeTool 3 BOX ?