Setool Box Updates

v0.914018/UNI

- fixed db2020 emptyboard filling (5 locks after emptyboard fill) bug.
Great sorry for that.
- many internal rebuilds to reduce memory consumption,etc.
so be ready for bugs.
- minor bugfixes
- added pnx5230 cid51 unlock by patch, change IMEI,
crossflashing, complete filesystem support.
both dcu60 and com/ufs are supported, while i STRONGLY recommend DCU60
method requires 1 credit.

( that is NOT "gti" method, if someone want to start blabling.
Instead,i'm sure that all "lead developers" will use my way
and loaders patched by me from that release ;) )

usage very same as CID49/CID50/CID51 db2012/db2020:
- check "use server", "alternative security bypass"
(that is mandatory), then
- if want to change IMEI - check
"unlock after flash",
"patch otp<>gdfs check in firmware",
"allow to change IMEI when unlocking"
- if want to unlock - check "unlock after flash"

note!.
when you using com, z310 phone can "stall" on restart phase.
in that case, remove battery for 3-5 seconds, then insert it back.

z310 rest files are uploaded on support area,in original rest files folder.

v0.914019/UNI

- A2 gdfs readout was incorrect from the beginning. fixed. thx,arash.
- pair of cosmetic fixes.

here is full distribution
Downloads - Se Tool - v0.914019 - Top Sony Forums

finally - z310 rest files
RapidShare: 1-Click Webhosting

v0.914020/UNI

- sometimes setool2 hangs on "Starting up..." session. fixed.
thx to arash for reporting and hard testing.

- for fun added "phone branding" readout in identify.

update only (replace old exe starting from 018 version with new)
Downloads - Se Tool - v0.914019_to_v0.914020 - Top Sony Forums

v0.914021/UNI

- added full a2 unlock via server.

usage is extremly same as with cid52 db2012/cid2 pnx5230/cid53 P1:
select phone model
on options, check "use server","do full unlock"
enter yours username/password
back to a2 tab
press unlock
request placed in queue, wait some time (up to 72 hours), retry.
follow program instructions (power on phone, install modem drivers,etc)

- misc bugfixes

rapidshare link:
Downloads - Se Tool - v0.914020_to_v0.914021 - Top Sony Forums
ps.
thx to arash for logo.

v0.914022/UNI

- added support for Locosto-based SEMC ODM models: at present it is T250,Z320.
supported both HS (red) and GP (brown) models, interfaces: com/ufs only

present features:
flashing, flash read, userlock reset,
network unlock (z320 is NOT rebooting after unlock :D )
TA (eeprom) backup auto-creating after each phone boot.
be warned:
booting of locosto-based phones is tricky process - perhaps,
you will need to disconnect/connect cable/battery several times before
phone will start booting.
BE WARNED:
always select correct model: z320 for z320 phones, t250 for t250 phones
Keep TA backups !
if you somehow damage TA area and have no backup - you have dead phone

- fixed rare bug with "old security" pda phones (appears in 021 version)
- some gui changes/fixes/addons
- perhaps, added some bugs ;) so please test and report issues.

rapidshare link
Downloads - Se Tool - v0.914020_to_v0.914022 - Top Sony Forums

ps.
locosto release was not possible without help of vasilius.
Arash, as usual, made nice logo for setool2. thx, Arash.
thx, someone (perhaps,you are from "rocker team") for finding
security hole in calypso hs/locosto hs chipsets.

you can find on support area next new firmwares:

Code:

k770 r8bc004
t650 r8bc004
w580 r8be001

some k790 r8bc004
some k800 r8bc004
few w880 r8bc004

also recently was uploaded a bunch of r1da038 firmwares for w910,k850

v0.914023/UNI

- modified locosto hs bypass algo, should be better now
(previous algo sometimes producing "romboot not answering" error)
- added flash manufactured output for j110/j120/k200/k220 phones.
- operator digit was swapped in identify output.

Downloads - Se Tool - v0.914020_to_v0.914023 - Top Sony Forums

Z250 firmwares uploaded on support area.
please, select Z320 phone to work with Z250.
when news/bugs will be enough, i'll release version with Z250 model selectable.

updated k630 firmware.
added few w890 firmwares (use any A2 model).
finally added z610 r1kh001 firmware.

updated j110_j120 simlock patches for latest firmwares
(firmwares will be uploaded shortly)

updated firmwares for j110_j120 to latest (r1d,r1d)



From now on server will NOT accept calculations requests,
if that IMEI is CALCULATING for other user.

you will see error like:

.......
Waiting for calculation process...
RESPONSE: "IMEI WAS ADDED BY ANOTHER USER" (0)
Error "IMEI WAS ADDED BY ANOTHER USER" during signature calculation
.......



warning.
due technical problems, signatures database lost on .197 server.

so, all users who experienced "double add to queue" problem and
previously added phone to queue on 27,28,29 january
please write me short PM with

username/password/phone imei - and i will restore yours lost credits.

once again.

that is applicable ONLY for .197 server and ONLY to phones,
which was added to queue on 27,28,29 january.

you SHOULD NOT write to yours resellers.
you SHOULD NOT write to forum moderators.
you SHOULD NOT write to unlocker.

you SHOULD write to me and only to me ONLY via PM.
all ICQ users, who will try to contact me regarding that problem,
will get immediate and forever IGNORE.

sorry for troubles, that is life.




also, users with A2 phone can experience "dead" phone after writing signature,
which was calculated on 29,30,31 january by .197 server

in that case do following

1. restore more earlier security units backup from
backup\%imei%\%imei%.backup
2. delete wrong signature from
backup\%imei%\%imei%.sign
3. make another request
4. write me pm with username/password/phone imei
and i will restore back 6 credits.

r8bf003 firmwares uploaded for k790/k800 phones
latest (r6g04/r9k009) firmwares uploaded for p1/w960 phones.

v0.914024/UNI

- added support for flash,usercode reset,gdfs and file operations
for cid53 pnx5230 phones (z555,w380 at present).
full unlock is possible via signature calculations
(only when signature calculcations are online)

- misc bugfixes, cosmetic mostly

- as usual, that it beta, so check for bugs and report them.

update eligible for 020 version ONLY, just unrar archive from distributive and
point updater to that directory.

link to updater on rapidshare:
Downloads - Se Tool - v0.914020_to_v0.914024 - Top Sony Forums

z555,w380 r9ba023 firmwares uploading on support area.

well, you wanted new firmwares ? you got them.

Code:

S500 R8BE001 firmware,fsimage,customizations uploaded
K630 R1EA030 firmware and few fsimages uploaded
K850 R1EA031 firmware and few fsimages uploaded
W890 R1EA030 firmware and few fsimages uploaded
W910 R1EA030 firmware and few fsimages uploaded
Z750 R1EA030 firmware and few fsimages uploaded


now you say - omg,wtf, why there is only one-two fsimage for r1ea03x a2 firmwares?
well, that is what we allowed to have by big daddy.

but... here is surprise:

Code:

if you noticed, there is files for each r1ea03x firmware, i.e:
K630_r1ea030_LangPack

do you know what is it? hell yeah! that is all possible languages.
just write that file... right, as custpack ..
together with available fsimage and you will get A LOT of languages.

if you don't want all languages, open langpack with any wanted
archiver and simple delete not needed languages.

here is contents of langpacks:

Code:

K630_r1ea030_LangPack
ar az bs cs en fa fr hr hu pl ru sk sl sq sr tl

K850_r1ea031_LangPack
ar az bg bs ca cf cs da de el en es et eu fa fi
fr gl he hr hu is it kk lt lv mk nl no pb pl pt
ro ru sk sl sq sr sv tl tr uk xl

W890_r1ea030_langpack
ar az bg bs ca cf cs da de el en es et eu fa fi
fr gl ha hr hu ig is it kk lt lv nl no pb pl pt
ro ru sk sl sq sr st sv tl tr uk xl yo zu

w910_r1ea030_langpack
ar az bg bs ca cf cs da de el en es et eu fa fi
fr gl ha he hr hu ig is it kk lt lv mk nl no pb
pl pt ro ru sk sl sq sr st sv tl tr uk xl yo zu

z750_r1ea030_langpack
ar az bg bs ca cf cs da de el en es et eu fa fi
fr gl ha he hr hu ig is it ja kk lt lv mk nl no
pb pl pt ro ru sk sl sq sr st sv tl tr uk xl yo
zu

ps.
not ask me what mean "xl,yo", etc means.

personal thanks to eerchy for k850 red firmware.
personal "fuckoff" to all other semc products (kukuruzer,etc)
which will (and they will,just believe me) use setool2 langpacks.


ps.
firmware upload just started, gently allow it to finish ...

recently i found one intresting article,here is excerpt from it:

Quote:
A MR3 sw for K200/K220

It’s the problem with “can’t store picture”
and “can’t power on” that is the main reason for this.
amazing, but that firmwares is on setool2 support now

for those who not understand:

Code:

r1ad001 (mr3) firmware for k200/k220 uploaded.

uploaded chinese,taiwan, hongkong r1ea031 k850 firmwares,
added some ready fsimages
uploaded chinese,taiwan r1ea030 w910 firmwares,
added some ready fsimages

v0.914025/UNI

- added preliminary db3150 r3b (?) support (chipID 0xC900)
- misc bugfixes, misc gui changes
- perhaps, new bugs

rapidshare link:
Downloads - Se Tool - v0.914024_to_v0.914025 - Top Sony Forums
please note.
update can ONLY can be applied on v0.914024 installation.

ps.
soon there will be major update, which will kill for business all SEMC upto A2.
to find exact date of "soon" - check calendar and check setool2 history.

following firmwares updated or added on support area:

k660 r1ea030 firmware and custpacks
k660 r2ea033 firmware and custpacks
k790 r8bf004 MAJOR update of fsimages and custpacks
k800 r8bf004 MAJOR update of fsimages and custpacks
w380 r8bb001 firmware and custpacks
w890 r1ea030 firmware and custpacks
w890 r1eb003 firmware and custpacks
w890 r1ec001 firmware and custpacks
w890 r3ea033 firmware and custpacks
z555 r9bb001 firmware and custpacks
z750 r1db005 firmware and custpacks
z750 r1ea030 firmware and custpacks

v0.914026/UNI

bugfixes,bugfixes...

- fixed cid52 OTP writing, was broken eons ego.
- added DB2020 emptyboards eroms, which are safe to use with EROM upgrade.
- pnx5230 support was broken, should be fixed, reports are welcome.
- changed usb support, perhaps will be better,perhaps not.
public testing will show results.
- some internal changes/bugs/bugfixes/etc

rapidshare link:
Downloads - Se Tool - v0.914020_to_v0.914026 - Top Sony Forums
please note.
update can ONLY be applied on v0.914020 installation.

as it is too much questions about promised release, some answers here.
it will be free FAST (~2 min) standalone patch support for cid52 db2012,db2020,pnx5230, cid53 pnx5230.
(if i get retail w380, guess will get it - have plenty of time before release)

so, that all on it.
lets find and clean bugs now.

K630 R1EA030 firmware and custpacks updated
V640 R1EA030 firmware and custpacks updated
V640 R1DA038 firmware and custpacks updated

v0.914027/UNI

- usb multi-flashing was broken, fixed
- added separate cda handling for each model.
cda.ini format
[model]
description=cda_value
- misc gui changes

Downloads - Se_Tool - v0.914020_to_v0.914027 - Top Sony Forums


please not, that update only applicable for 0.914020 installation.

*v0.914028/UNI*



*SEMC *moved to *CID53*. "thx" goes to GTI team.
*CID52 *became *outdated* and will not be used more.
*all *firmwares for *all *models are being converted to *cid53 *now by emma admins.
so - *cid53 *firmwares will be on support in few days.

alternative bypass WILL NOT WORK MORE. lets wait for somebody to do it
---------

- added db2020 cid53 standalone flashing/usercode reset.
network unlock will work only via csca+signature servers.

Downloads - Se_Tool - v0.914020_to_v0.914028 - Top Sony Forums

uploaded k790,k810,t650 red53 firmwares

please open setool2.ini in notepad and replace
"servers=xxxxx" line to following

Código:
servers=server1.doesntexist.com,server2.doesntexis t.com,server3.doesntexist.com
IPs ,of course, will be valid, but they can be changed, so better use FQDNs.

ps.
don't know why i'm not done it earlier

recently were added some updated firmwares for w910,k850,v640, red53 k770, etc...
i was too lazy to pos

uploaded *K850 r1ea037* firmware.uploaded *k205* firmwares (for those who need them)uploaded *k550im cid53* firmwares

uploaded red cid53 firmwares for k530,k818,w610,w888
uploaded firmwares for k858,w908
custpacks for that models are updated too.

uploaded w660,s500 red53 firmwares and custpacks

uploaded *K550 red53* firmware and customization packsuploaded *W880 red53* firmware and customization packs

v0.914029

- added free,standalone,no testpoint, no additional expensive "tp cables"
alternative bypass method for following chipsets:
db201x cid52, db2020 cid52/cid53, pnx5230 cid52/cid53
all you need - is cheap TEST SIM CARD (or OPERATOR card)
please, see all details about that method in THAT FAQ post.
- fixed gdfs write problem in db201x brown phones
- added support for loader inside phone
(for QUICK patch/etc operations using new alternative bypass method)
for that, run "executor" in phone (menu->games), then check in settings
"use preloader security bypass" and then do desired operation.
- misc other bugfixes, maybe some bugs, check and report.

that method was impossible without help of darkmen,
lead programmer from davinci team.
it was he, who discovered main idea of altbypass.
it was discovered when we tried to break db2020 cid52 in july 2007.
after he shared idea with me, in same day we have full implementation of
alternative bypass for db2020.
then when we decided to put that method free (due different reasons)
i quickly adapted method for db2012/pnx5230 phones.

because of that - davinci has full rights to use mine loaders/etc,
which are used in that method and i willingly shared it with them.

i think darkmen will enable support for it in next hour-two.

to all other copycats,especially to "freebeggers heroes" -
i wishing you to slowly die in despair.

RapidShare: 1-Click Webhosting

How to service db2010/db2020/pnx5230 cid52/cid53 using new setool2 (>=v0.914029) alternative bypass method ?
what problems i can meet and how to resolved them ?
what precautions should i follow ?

a:

terms:
phone should work fine.
red blink, white blink, etc phones are NOT supported.

you can only use alternative bypass if your phone has supported firmware (you have BOTH rest file and bypass package)
if yours firmware not supported, either flash supported firmware (only main part in enough) or post request on forum.

BEFORE using new alternative bypass method you SHOULD turn phone on and install CSCA(MODEM) drivers.

i STRONGLY recommending to browse that FAQ and READ article about com-ports growth - there is EXTREMLY helpful file,which
prevents discovering of same phone models as new devices.

if you are capable user, you can edit .inf files of CSCA(MODEM) drivers - we only need to install
Sony Ericsson Device XXX bus driver and Sony Ericsson Device xxx USB WMC Modem - all other devices is not needed.
that will help you to save comport numbers.

important! if your phone had unsupported firmware and you flashed main part (all parts) of supported - you MUST power on phone, so phone will update new firmware info.

because of way new alternative bypass method works, you need
TEST SIM card (mcc/mnc 00101) or OPERATOR SIM card. (you must be able browse phone menu,etc)

supported following models:

db2012 cid52 - normal CID52 phones (w200,w300), abnormal CID52 phones (k310,k510,w810,z550)
db2020 cid52/cid53 phones
pnx5230 cid52/cid53 phones

supported operations:
unlock via patch, all additional things that setool2 can provide.

YOU AGAIN NEED REST FILES !!!! FOR ALL MODELS, WHICH ARE SUPPORTED FOR ALTBYPASS !!!
GET THEM FROM SUPPORT SITE OR DO IT YOURSELF

Procedure of new alternative security bypass :

1. select correct phone model
2. go to settings tab,
3. check BOTH "signed mode (using server)", "enable alternative security bypass", that is required
4. optionally, check "unlock after flash", "patch otp<>gdfs check in firmware"+"allow to change IMEI when unlocking" (read precautions)
5. optionally, check "complete phone after flash" (i recommend use custpacks)
6. go back to semc tab
7. if you need, add main+fsimage+custpack (script)
8. press desired operation
9. when asked, disconnect phone, insert TEST SIM, power on phone fully and connect it.
10. HOLD "C" (or "2" for w880/simular) BUTTON ALL THE TIME UNTIL PHONE REBOOTS.
11. when asked, disconnect phone, remove battery, insert battery, then connect phone while holding corresponding button ('C' or '2' for w880). In 99% cases phone will reboot and connects automatically.

approximate time for unlock by patch using new alternative bypass method is 160-180 seconds on one phone.

precautions:
please take care that there is NO (at least, i can't get) cid52 firmwares for following db2010 phones: k310,k510,w810,z530,z550

luckily, k310,k510 can be flashed with w200 firmware, so we can always return them to original state.

but it is NOT related to w810,z530,z550 phones.
cause there is no firmwares, we can't recover them in case of error.

because of that, one mistake with that phones - and you get deadweight.
you have been warned.

under mistake i mean:
- terminated flash or anything,which prevents phone from starting up
- changed IMEI of phone, which prevents phone from using new alternative bypass method.

will repeat again:

DO NOT WRITE FOREIGN IMEI IF YOU NOT HAVE BACKUP IN DB2010 CID50/51/52/53 , DB2020 CID49/51/52/53, PNX5230 CID49/CID51/CID52/CID53 PHONE

THINK 10 TIMES BEFORE CHANGE IMEI IN W810/Z530/Z550 CID 52 PHONES
DO NOT EVEN THINK TO MESS UP FIRMWARE IN W810/Z530/Z550 CID52 PHONES

possible problems:

in case of terminated flash/etc you can always return phone to life by flashing any original firmwares into them -
and then it ready for execution again

short info of firmwares we have and have not:

db2012 k310 (via w200),k510 (via w200) ,w200,w300 - CID52 firmwares available.
db201x abnormal CID52 phones Z530,Z550,W810 - NO CID52 firmwares.
db2020 - supported CID52/CID53 firmwares available
pnx5230 - supported CID52/CID53 firmwares available

on "step 11" phone not connecting, but simple turning on

due delicate bypass process such thing is possible, but that happens VERY-VERY rare.
nothing weird happens in that case - you have 4 choices what do :

1. terminate process (press stop) and retry from beginning.
2. as phone powered on now, go to menu->games and run program called "executor". phone should "turn off",sometimes with white screen,sometimes not. Continue procedure then (step 11)
3. if you run "executor",but pressed stop - go to settings, check "enable preloader security bypass" - now you can do any operation with phone, like unlock/etc.
4. reflash phone in "signed mode" and start from step 1. (idiotic, isn't it ? )

on step 11 setool2 stucks in loop with message "PHONE NOT READY YET", but phone is turned on okay

well, better ask semc programmers why that happens... anyway - to solve that -
just press "STOP" ONCE - setool2 will continue procedure.

on step 11 i got message "CAN'T START EXECUTOR,RETRYING..."

it is okay to have that message if phone not in "normal mode" or starting up. just switch phone to normal mode and wait.


following firmwares are supported:

W880

R1JC002_CXC1250640_GENERIC_AI
R1KC001_CXC1250640_GENERIC_AI
R1KG001_CXC1250640_GENERIC_AI
R6BC002_CXC1250640_GENERIC_AI
R8BA024_CXC1250640_GENERIC_AI
R8BC004_CXC1250640_GENERIC_AI
R8BE001_CXC1250640_GENERIC_AI

Z310
R1JC002_CXC1250594_GENERIC_AL
R1KF001_CXC1250594_GENERIC_AL
R6BC002_CXC1250594_GENERIC_AL
R8BA024_CXC1250594_GENERIC_AL
R8BA024_CXC1250790_VODAFONE_AL

W710
R1EE001_CXC1250433_GENERIC_CH
R1GB001_CXC1250433_GENERIC_CH
R1JC002_CXC1250433_GENERIC_CH

Z710
R1EF001_CXC1250434_GENERIC_CN
R1JC002_CXC1250434_GENERIC_CN

K510
R4EA031_CXC1250231_GENERIC_CO
R4GC010_CXC1250231_GENERIC_CO

W850
R1ED001_CXC1250200_GENERIC_CY
R1GB001_CXC1250200_GENERIC_CY
R1JC002_CXC1250200_GENERIC_CY
R1JG001_CXC1250200_GENERIC_CY
R1KC001_CXC1250200_GENERIC_CY
R1KG001_CXC1250200_GENERIC_CY

K310
R4DA044_CXC1250466_GENERIC_DO
R4EA031_CXC1250466_GENERIC_DO
R4GC010_CXC1250466_GENERIC_DO
r4da044_CXC1250472_ORANGE_DO

W830
R1JC002_CXC1250705_GENERIC_EA
R1JC002_CXC1250713_CMCC_EA
R1KG001_CXC1250705_GENERIC_EA
R1KG001_CXC1250710_CHINA_EA

K790
R1CC003_CXC1250477_DEV_EV
R1EG001_CXC1250477_GENERIC_EV
R1GB001_CXC1250477_GENERIC_EV
R1JC002_CXC1250477_GENERIC_EV
R1JG001_CXC1250477_GENERIC_EV
R1KC001_CXC1250477_GENERIC_EV
R1KG001_CXC1250477_GENERIC_EV
R8BC004_CXC1250477_GENERIC_EV
R8BF003_CXC1250477_GENERIC_EV

W660
R6AD001_CXC1250446_GENERIC_FY
R6BC002_CXC1250446_GENERIC_FY
R8BB001_CXC1250446_GENERIC_FY
R8BE001_CXC1250446_GENERIC_FY

W810
R4CE012_CXC1250316_GENERIC_HN
R4CK003_CXC1250316_GENERIC_HN
R4EA031_CXC1250316_GENERIC_HN
R4GC010_CXC1250316_GENERIC_HN
r4db005_CXC1250316_GENERIC_HN

W300
R4EA031_CXC1123260_GENERIC_JE
R4GG001_CXC1123260_GENERIC_JE
R9A031_CXC1123260_GENERIC_JE
R9A035_CXC1123260_GENERIC_JE
R9A036_CXC1123260_GENERIC_JE

W350
R10BA015_1204-3117_GENERIC_JH

W580
R6BC002_CXC1123362_GENERIC_LA
R8BA024_CXC1123362_GENERIC_LA
R8BE001_CXC1123362_GENERIC_LA

W380
R10BA015_1201-4421_GENERIC_LE
R9BA023_1201-4421_GENERIC_LE
R9BB001_1201-4421_GENERIC_LE

K550
R1JD001_CXC1250669_GENERIC_LI
R1KC001_CXC1250669_GENERIC_LI
R1KG001_CXC1250669_GENERIC_LI
R6BC002_CXC1250669_GENERIC_LI
R8BA024_CXC1250669_GENERIC_LI

S500
R6AC003_CXC1123326_GENERIC_LY
R6BC002_CXC1123326_GENERIC_LY
R6BC002_CXC1123460_CHINA_LY
R8BA024_CXC1123326_GENERIC_LY
R8BE001_CXC1123326_GENERIC_LY

W200
R4GB001_CXC1250719_GENERIC_ME
R4GC012_CXC1250719_GENERIC_ME
R4GH001_CXC1250719_GENERIC_ME
R4HA014_CXC1250719_GENERIC_ME
R4JA011_CXC1250719_GENERIC_ME

Z555
R9BB001_1202-6764_GENERIC_MG
R10BA015_1202-6764_GENERIC_MG
R9BA023_1202-6764_GENERIC_MG

Z550
R6BA033_CXC1250583_GENERIC_ML
R6CA009_CXC1250583_GENERIC_ML
R6GA004_CXC1250583_GENERIC_ML

Z530
R6DA001_CXC1250454_GENERIC_MU
r6ac001_CXC1250454_GENERIC_MU
r6ba030_CXC1250454_GENERIC_MU

V630/K618
R1JC002_CXC1250556_VODAFONE_MW
R1JE001_CXC1250556_VODAFONE_MW

Z610
R1ED001_CXC1250546_GENERIC_MY
R1EJ001_CXC1250546_GENERIC_MY
R1GB001_CXC1250546_GENERIC_MY
R1JC002_CXC1250546_GENERIC_MY
R1JG001_CXC1250546_GENERIC_MY
R1KH001_CXC1250546_GENERIC_MY

W610
R1JD001_CXC1250747_GENERIC_NA
R1JE001_CXC1250747_GENERIC_NA
R1KC001_CXC1250747_GENERIC_NA
R1KG001_CXC1250747_GENERIC_NA
R6BC002_CXC1250747_GENERIC_NA
R8BA024_CXC1250747_GENERIC_NA

K530
R6BC002_CXC1250912_GENERIC_NC
R8BB001_CXC1250912_GENERIC_NC
R8BE001_CXC1250912_GENERIC_NC

K810
R1KC001_CXC1250811_GENERIC_SM
R1KG001_CXC1250811_GENERIC_SM
R6BC002_CXC1250811_GENERIC_SM
R8BA024_CXC1250811_GENERIC_SM
R8BE001_CXC1250811_GENERIC_SM
R8BF003_CXC1250811_GENERIC_SM

T650
R8BB001_1200-2562_GENERIC_SN
R8BC004_1200-2562_GENERIC_SN
R8BE001_1200-2562_GENERIC_SN

K610
R1ED001_CXC1250374_GENERIC_TH
R1GB001_CXC1250374_GENERIC_TH
R1JC002_CXC1250374_GENERIC_TH
R1JG001_CXC1250374_GENERIC_TH
R1KC001_CXC1250374_GENERIC_TH
R1KG001_CXC1250374_GENERIC_TH
R8BA024_CXC1250374_GENERIC_TH

K770
R8BA024_1201-7587_GENERIC_VI
R8BC004_1201-7587_GENERIC_VI
R8BE001_1201-7587_GENERIC_VI

K800
R1ED001_CXC1250210_GENERIC_WI
R1GB001_CXC1250214_CHINA_WI
R1JC002_CXC1250210_GENERIC_WI
R1JG001_CXC1250210_GENERIC_WI
R1KC001_CXC1250210_GENERIC_WI
R1KG001_CXC1250210_GENERIC_WI
R8BA024_CXC1250210_GENERIC_WI
R8BC004_CXC1250210_GENERIC_WI
R8BF003_CXC1250210_GENERIC_WI

v0.914030

- "complete after flash" was broken when using new
"alternative security bypass" mode. fixed
- "use preloader bypass mode" not allowed
"unlock" operations. fixed
- memory overrun was present, which sometimes
prevents phones from booting. fixed.

v0.914029_to_v0.914030

v0.914031

- by request added pause after preparation part of new altbypass method.
please check FAQ for change in procedure.

- added possibility to create restoration files automatically.
for that, identify phone to find out what firmware inside.
then, add that firmware to firmware area and identify phone AGAIN.
rest file will be created if firmware is okay.

- added all latest BYPASS PACKAGES

RapidShare link for v0.914029_to_v0.914031.exe

WARNING. WARNING. WARNING

if you ever downloaded *lastest* rest files from following links:


Code:
---------
FileFactory.com - free file hosting
FileFactory.com - free file hosting
FileFactory.com - free file hosting
FileFactory.com - free file hosting
FileFactory.com - free file hosting
---------
please note, made *incorrect* files for following phone models:

k750,w700,k600,w900,w550,w600,*w350,w380,z310*
you *will lose logs and produce "dead" phones (need reflash)* if will use that files.

you will see next error message (names can vary)


Code:
---------
Restore from:R1JC002_CXC1250594_GENERIC_AL
verify block error
last blk:44140000,00010000
gdfsWrite no ACK
Unlock FAILED
---------
* ORIGINAL SETOOL2 REST FILES ON SUPPORT ARE OKAY*

* PLEASE, DELETE INCORRECT REST FILES (EXTRACT ATTACHED SCRIPT, PUT IT IN SETOOL2 DIRECTORY AND RUN)

AND USE ORIGINAL FILES FROM SETOOL2 SUPPORT OR USE AUTOMATIC RESTORE FILE CREATION FEATURE OF 031 VERSION.
*
***************

v0.914032

- not important bugfixes, just merged latest fixes in different modules.

v0.914029_to_v0.914032

*v0.914033*

- added *FREE STANDALONE* new alternative bypass method
for db201x cid50/cid51, pnx5230 cid49/cid51, db2020 cid49/cid51.
you DO NOT NEED logs for them anymore.
PLEASE CHECK FAQ (http://www.mobile-files.com/forum/sh...0&postcount=47) for *important*instructions.

- added all latest bypass packages

Rapidshare link (http://"http://rapidshare.com/files/11617279...14033.exe.html)

ps.
we forced to complete "free4all",because griffin "team" boldly stoled
our solution and made everything for free and *completely* unprotected,
like they always do.
They even used our executor, and changed inside everything
to "griffin team". Well, that is exactly what i expected from any team.
there is too much crocodiles and lake is dried

*v0.914034*

- added FREE STANDALONE new alternative bypass method
for *db201x cid53* phones.

please note that due lack of all needed loaders,
"identify" for cid53 db201x phones will only work with DCU60.

RapidShare link (RapidShare: 1-Click Webhosting)

some w200 cid53 firmwares are uploaded. main and SFA-files only for now.
filesystems will be uploaded as they appear.v

uploaded w200 red53 filesystems and firmwares r4gb001 r4gh001 r4ha014 r4ja011 r4jb001
uploaded w830 red53 filesystems and firmwares r1jc002 r1kg001

and little gift for setool2 owners: r1f030 firmware for k660 w890 w910
because that firmware is not released yet, i prepared language package with all language available inside.
treat that language package as customization file.

ps.
if you not need specific language - delete it from language packages.

uploaded r3ba030 firmware for c702. kinda exclusive
because that firmware is not released yet, i prepared language package with all language available inside.
treat that language package as customization file.

ps.
if you not need specific language - delete it from language packages