W810 Configuration error

Printable View

02-20-2008
kerolah

W810 Configuration error

HI
i flashed my phone made a patch with simlockpatch gen put the patch on with setools and i get a error message on my phone when i try use it sayin "configuration error please contact service provider"

I bought the phone second hand
so i had to unlock the sim it says its unlocked when i do *<*>>* or whatever
but it still says its locked when i do identify in se tools!
i have encountered this problem on 2 firmware versions!
what do i do PLZ HELP ?
ta

Welcome to SEtool2 ( LITE edition ) v 1.10
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit Index of ./ and buy FULL.

Going to execute VKP script....
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35657401257207 CERT:RED
PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
Flash ID check:897E
Flash props sent ok

DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

Trying to launch embedded bootloader...
INT LDR:COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:897E
Flash props sent ok
FOUND: R4DB005_CXC1250316_GENERIC_HN
Restore from:R4DB005_CXC1250316_GENERIC_HN
Starting to process VKP patch script: C:\Documents and Settings\Yeah Kyle!!!\Desktop\sonny\SIMLockPatchGen\vkp\Remove_S IM_lock_W810_R4DB005.vkp
VKP script loaded OK. Lines: 6
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44E40000
Blocks selected OK. Reading blocks: 1
Blocks readed to memory OK. Checking contents...
Blocks patched OK. Start writing...
Block 0 written
VKP script executed OK
Elapsed:45 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:35657401257207 CERT:RED
FLASH CID:49 COLOR:RED

Model:W810i
MAPP CXC article: R4DB005 prgCXC1250316_GENERIC_HN
MAPP CXC version: R4DB005
Language Package:CENT_EUROPE
CDA article: CDA102494/158
CDA version: R2A
Default article: cxc1250324
Default version: R4DB005

Network LOCKED
Operator: 505-01

USERCODE:0000

RESTORATION FILE PRESENT FOR DETECTED FIRMWARE

Elapsed:7 secs.
02-20-2008
Khaba

did you customize your phone? I mean did you uploaded the custom files needed? I belive you didn't and thats the reason why you get that error not because of the patch.
02-20-2008
simox

I agree with Khaba, you need to customize your phone. Check this thread: XS++ 2.x Guide, section III. Choosing the correct firmware.

Quote:

so i had to unlock the sim it says its unlocked when i do *<*>>* or whatever
but it still says its locked when i do identify in se tools!
i have encountered this problem on 2 firmware versions!

If you check the simlock status in >*<<*<* menu, and the locks are unlocked, then everything is fine. Your phone is unlocked. However if you check the simlock status in XS++ SETool2 Lite etc., you sill get Network LOCKED. Don't worry about that, it is normal...
02-20-2008
ali_power42

is that vkp compatible with r4db005??
if yes so simply full flash your phone and you should customize your phone with a custpack
if not customize you will see configuration error
02-20-2008
kerolah

1.SO i start up xs++
2.click customize system file
3.then do i match my cad to CDA article: CDA102494/158 or CENT_EUROPE
4.then i put the firmware (W810_R4DB005_MAIN_GENERIC_HN_CID49) in the top box
5.flash
6.put (W810_R4DB005_MAIN_GENERIC_HN_CID49) in second box
7.flash
8.make patch
9. write script with setools
10.done

is that correct.... the only step im not sure about is step 3! thankyou

**EDIT

i tryed to do it and after i flash it just keeps doign this over and over

23:35:12| +++ Sending CS_LOADER...
23:35:12| Sending loaders\db2010_cid49red_cs_r5a.bin...
23:35:14| This is a CHIPSELECT loader
23:35:14| Activating loader...
23:35:14| Activating GDFS...
23:36:02| Checking if loader is unlocked...
23:36:02| This loader is LOCKED (errorcode=30)
23:36:02| ***** Auth startup (cmd 05-50)
23:36:02| ***** AuthA (cmd 05-42) hacking
23:36:14| Try #1000 and counting...
23:36:26| Try #2000 and counting...
23:36:38| Try #3000 and counting...
23:36:50| Try #4000 and counting...
23:36:52| ...4201
23:36:52| Matches: 0:0003954, 1:000246, 2:0001, 3:0
23:36:52| Totals : 0:0007886, 1:000511, 2:0005, 3:0
23:36:52| Theory : 0:0007876, 1:000523, 2:0002, 3:0
23:36:52| ***** Reset (cmd 01-0C)
23:36:52| Waiting for the phone to disconnect
23:36:53| Waiting for the phone to reconnect
23:36:56| Baseband ID: 8040
23:36:56| Hardware Platform: db2010 Marita compact
23:36:56| Protocol Version: 3.1
23:36:56| ***** Sending PRODUCTION_ID LOADER
23:36:56| Sending loaders\db2010_cid00_prodid_p3k.bin...
23:36:56| This is a PRODUCTION_ID loader
23:36:56| +++ Sending CS_LOADER...
23:36:56| Sending loaders\db2010_cid49red_cs_r5a.bin...
23:36:58| This is a CHIPSELECT loader
23:36:58| Activating loader...
23:36:58| Activating GDFS...
23:37:46| Checking if loader is unlocked...
23:37:46| This loader is LOCKED (errorcode=30)
23:37:46| ***** Auth startup (cmd 05-50)
23:37:46| ***** AuthA (cmd 05-42) hacking
23:37:58| Try #1000 and counting...
23:38:10| Try #2000 and counting...

*edit*
02-20-2008
jasmin

Look here:

XS++ 3.1 Guide-Flashing,Customizing,Recovering

Go step by step.

Nice day
02-20-2008
kerolah

even if i did follow that step by step.... it still doesnt answer what the hell it is doing repeating itself over and over and what cda i need to match my firmware altough i think i am correct!

sorry about these questions that may seem stupid to you guys but i am a noob and noobs are noobs =]
02-20-2008
jasmin

Quote:

4.then i put the firmware (W810_R4DB005_MAIN_GENERIC_HN_CID49) in the top box
5.flash
6.put (W810_R4DB005_MAIN_GENERIC_HN_CID49) in second box
7.flash

Did you flash main two times? Because here I see two times flashed main and no flashed filesystem.

Nice day
02-20-2008
ali_power42

Quote:

Originally Posted by kerolah

even if i did follow that step by step.... it still doesnt answer what the hell it is doing repeating itself over and over and what cda i need to match my firmware altough i think i am correct!

sorry about these questions that may seem stupid to you guys but i am a noob and noobs are noobs =]

bro use setool2lite instead of xs++
it has been tested many many times and every thing is ok
if you want not to have doubt do full flash:
fota+main+fs+custpack

it is very easier than xs++
02-20-2008
Khaba

don't mind the FOTA, just flash FS, MAIN and Custom Pack, and use the next firmware version,R4EA031 for MAIN and R4ED001 for FS. According to your log you need these files:
FS: Downloads - R4EA031_RED49 - W810_R4ED001_FS_CENT_EUROPE_RED49 - Top Sony Forums
MAIN: Downloads - R4EA031_RED49 - W810_R4EA031_MAIN_GENERIC_HN_RED49 - Top Sony Forums
Custom pack: Downloads - w810custpack - W810_CDA102555_2_R2A_Generic_CENT_EUROPE - Top Sony Forums
02-20-2008
kerolah

Quote:

Originally Posted by jasmin

Did you flash main two times? Because here I see two times flashed main and no flashed filesystem.

Nice day

that was a typo

I GOT IT TO WORK! it was because i didnt do the cda thing =] thanks for all u guys help on that customation shit
02-21-2008
jasmin

Ok, good to hear this.

Nice day