Printable View
I tried to power on my pohne when it came up with WSOD. Trying to be clever i tried to reflash the firmware to fix it, but the wire came loose during reflash. Now my z610i wont turn on! when i connect it to XS ++ and SE TOOLS its recognised but disconnects after roughly 30 seconds.
SEUS tries flashing my firmware until it gets to about 3% then says update failed.
What should i do?
Thanks
Joel.....
What error do you get when the phone disconnects after 30secs?
Please post up the logs (also the one of the flashing process when you undeliberately unplugged the phone).
I havent got the log of when i accidently unplugged the wire due to having to reboot system but i can post other one it is:
Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
if you like LITE edition - please visit Index of ./ and buy FULL.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI:xxxxxxxxxxxxxxxx CERT:RED
FLASH CID:52 COLOR:RED
set_gdfs_props failed, exiting
Elapsed:4 secs.
Will backup GDFS now.
ChipID:9900,EMP protocol:0301
OBSOLETE EROM,FORCING COLOR -> RED
OBSOLETE EROM,FORCING CID -> 49
erom_readvar: error reading unit 0/6
error while reading security units
SECURITY UNITS CAN'T BE READ !
DAMAGED FIRMWARE/GDFS OR EMPTY PHONE
phone pre-boot failed,possible RECOVERY needed.
Elapsed:5 secs.
Uh oh...looks like a damaged GDFS :(
The log is stored in your SE Tool folder.
nope cannot find it!!!!!! Is a damaged GDFS BAD???????
can it be fixed is the main thing?????
There should be a folder called "Logs" in your SE Tool folder. In this folder you'll find textfiles named Session0([DATE]_[TIME]).txt.
A bricked GDFS can't be fixed on CID52 phones. If the GDFS is really damaged you would have to replace the flash IC in order to bring the phone back to life.
does this mean buying wotang credit or davinci credit and doing it.?????
if so can you do me a little how to so i know what i have to do! As i have NO clue
this is only log i could find that is slightly relevent!!!
Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
if you like LITE edition - please visit Index of ./ and buy FULL.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI:CERT:RED
FLASH CID:52 COLOR:RED
Model:Z610i
MAPP CXC article: R1JE001 prgCXC1250548_HUTCHISON_MY
MAPP CXC version: R1JE001
Language Package:HUTCH_1
CDA article: CDA102579/3
CDA version: R12A
Default article: cxc1250495
Default version: R1JE001
Network LOCKED
Operator: MULTIPLE
Elapsed:17 secs.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
loader startup: executed
loader GDFS startup: executed
USERCODE reset to 0000
Elapsed:18 secs.
RECOVERY MODE STARTED
skipping empty loader...
All possible recovery loaders fail. That phone not supported
Elapsed:1 secs.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI:CERT:RED
FLASH CID:52 COLOR:RED
Model:Z610i
MAPP CXC article: R1JE001 prgCXC1250548_HUTCHISON_MY
MAPP CXC version: R1JE001
Language Package:HUTCH_1
CDA article: CDA102579/3
CDA version: R12A
Default article: cxc1250495
Default version: R1JE001
Network LOCKED
Operator: MULTIPLE
Elapsed:1 secs.
RECOVERY MODE STARTED
skipping empty loader...
All possible recovery loaders fail. That phone not supported
Elapsed:12 secs.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
Elapsed:0 secs.
Elapsed:0 secs.
file can't be found or opened
Elapsed:0 secs.
Will backup GDFS now.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
loader startup: executed
No, you can't do anything with software. The IC is a part of the phones mainboard. You need special equipment to desolder it.
The only thing you could try is to give it to a service center without mentioning that you've tried to flash it yourself.
aww man...... i do have a gdfs backup tho...... I live in england, cambridge in england. do you know where the nearest 1 is?
No, sorry. I live in Germany and do therefore not know where the service centers in England are located ;)
You could try google or contact SE.
I tried again with the phone and it came up with this: ( Doesnt seem so bad now)
Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
if you like LITE edition - please visit Index of ./ and buy FULL.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI:CERT:RED
FLASH CID:52 COLOR:RED
set_gdfs_props failed, exiting
Elapsed:6 secs.
Will backup GDFS now.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
loader startup: executed
wrong response, break.
failed, that is fatal
Abort all operations.
Elapsed:66 secs.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
loader startup: executed
wrong response, break.
failed, that is fatal
Abort all operations.
Elapsed:120 secs.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
Will read 00020000 bytes from 44000000
Reading:131072 bytes
Elapsed:7 secs.
I don't think it looks very promising...
Anyway, have you tried to restore your GDFS backup yet?
BTW: Please remove your IMEI if you post logs so I don't have to do it everytime.
No not yet! where are the backups stored??
and yes ill remove imei from now on. Thanks for the tip! :)
The backups are stored in the SE Tool folder "gdfs_[your IMEI].bin".
ok. found it now how do i flash it?
ive tried flasing but it can't get past "executing cs loader gdfs startup" just sits there and does nothing. and my phone keeps randomly disconnecting after 30 secs then reconnecting again.
Hmm...that's what I expected to happen.
Sorry but I don't think you'll be successful with that phone.
The last thing you could try is to press the unlock/repair button. SE Tool will try to update your EROM then. But I seriously doubt it'll get you anywhere....
nope wont do anything. just a thought but i dont have a battery in my phone. i lost it a few weeks back and maybe thats why its hanging???
i have the phone just connected via mains power and usb together.
I got a new 1 coming in a couple days
What do you mean mains power and USB together?!
Do you have the CST-75 charger?
You should ALWAYS use the battery when flashing (and the battery should be fully charged, just in case)!
Woops! I used the charger and on the end of the plug is another connector in which i can plug in the usb cable at the same time!
I don't have a battery, maybe this is why my phone keeps randomly shutting off after 30 secs?
It could be the reason but I don't think so...
The problem occured after another mistake and the logs you get now don't indicate a problem with the power supply.
Greetings
I have a similar problem with my se K810i.
If anyone can help me please look at the following link. I have posted my problem in detail.
http://www.topsony.com/forum/showthread.php?t=8474
- can anyone tell me what is really wrong with my phone -
Any help will be greatly appreciated.
Cheers
:)