Newbie w810i patching

Hi guys, got a new black w810i, trying to unlock using tutorials on here, the problem i have is when using setool 1.11 it does'nt seem to find my phone! I follow the instructions but when i press write script, press c button and connect usb cable, the progress bar along bottom just keeps going (2 hours this morning) and nothing happens! where am i going wrong? Not sure if it's cid 49 or 50 (how do you tell?) Thanks. P.S should sim card be in or out during this operation (have tried both ways without success)

did you install the usb drivers for the phone? install SEUS start it, connect the phone and let it do the job, when it gets to ask you if you want to upgrade or it says you have the latest firmware close and disconnect. then start SeTool press Identify press and hold C while connecting the cable. look in that identification, you can see if your phone is CID 49 or 50. you also need to know if the patch is for your firmware. please post the log.

Ok have installed everything from installation disk which i assume has usb drivers im running setool 1.11 how long should it take to identify?

The PC Suite Etc In The Installation Wont Have USB Flash Drivers. Install SEUS, Use It To Detect Your Phone And Disconnect. Now Use SeTool. Detecting Takes A Second Or Two.

Excuse my ignorance but what ie seus and where can i get ir? Thanks

SEUS = Sony Ericsson Update Service
You find it here Sony Ericsson - Update Service - Update service software

Thank you guys got it, now working, here is the log, just want to unlock, what's the best patch? Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit Index of ./ and buy FULL.

ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:xxxxxxxxxxxxxx CERT:RED
FLASH CID:49 COLOR:RED

Model:W810i
MAPP CXC article: R4EA031 prgCXC1250316_GENERIC_HN
MAPP CXC version: R4EA031
Language Package:T_MOB_INT_A
CDA article: CDA102494/8
CDA version: R16A
Default article: cxc1250324
Default version: R4ED001

Extended LOCKED
Operator: MULTIPLE

USERCODE:0000

RESTORATION FILE PRESENT FOR DETECTED FIRMWARE

Elapsed:8 secs.

Nearly there! have found simox patch generator, now i need to know (a)main firmware, and (b)firmware version, i assume these are in the above log, can someone point me in the right direction, cheers

You need a W810_R4EA031_MAIN_GENERIC_HN_RED49 fimware...

Quote:

---

Originally Posted by simox

You need a W810_R4EA031_MAIN_GENERIC_HN_RED49 fimware...

---

Hello. Lamentablely you can not download files because your account doesn't have enough privileges.
AAARRRGGGHH! Is there somewhere else i can get this firmware?

Look here:

How to get access to download section

and

Forum Rules

Quote:

---

If you want to download and no cooperate in the forum, you have the following options:
Premium2 - 50MB per day - 2 Euros during 5 days.
Premium5 - 75MB per day - 5 Euros during 15 days.
Premium10 - 100MB per day - 10 Euros during 30 days.
Premium20 - 125MB per day - 20 Euros during 60 days.
Premium30 - 150MB per day - 30 Euros during 90 days.

---

Nice day

that's cid49 phone. :-)

Why don't you use XS++ and FarManager instead to unlock the Phone? Because I have w810i and it works fine with XS++ and FarManager.